Ford 2012 Expedition v.1 Manuel d'utilisateur télécharger pdf (Page 302)

100

101

WARNING: Do not connect the end of the second cable to the

negative (-) terminal of the battery to be jumped. A spark may

cause an explosion of the gases that surround the battery.

Ensure that the cables are clear of fan blades, belts, moving parts of both

engines, or any fuel delivery system parts.

Jump starting

1. Start the engine of the booster vehicle and run the engine at

moderately increased speed.

2. Start the engine of the disabled vehicle.

3. Once the disabled vehicle has been started, run both engines for an

additional three minutes before disconnecting the jumper cables.

Removing the jumper cables

Remove the jumper cables in the reverse order that they were

connected.

Note: In the illustration, the vehicle on the bottom is used to designate

the assisting (boosting) battery.

1. Remove the jumper cable from

the jump starting stud.

Roadside Emergencies

302

2012 Expedition (exd)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 297 298 299 300 301 302 303 304 305 306 307 ... 399 400

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 Expedition v.1 Manuel d'utilisateur Page 302

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 Expedition v.1