Ford 2012 Expedition v.1 Manuel d'utilisateur télécharger pdf (Page 328)

100

101

6. Wipe the dipstick clean. Insert the dipstick fully, then remove it again.

• If the oil level is within this

range, the oil level is acceptable.

DO NOT ADD OIL.

• If the oil level is below this

mark, engine oil must be added

to raise the level within the

normal operating range.

• If required, add engine oil to the engine. Refer to Adding engine oil

in this chapter.

• Do not overfill the engine

with oil. Oil levels above this

mark may cause engine

damage. If the engine is

overfilled, some oil must be

removed from the engine by an

authorized dealer.

7. Put the dipstick back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to Checking the engine

oil in this chapter.

2. If the engine oil level is not within the normal range, add only certified

engine oil of the recommended viscosity. Remove the engine oil filler cap

and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

upper hole or the MAX mark on the engine oil level dipstick.

4. Install the dipstick and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise

1/4 of a turn until the cap is fully seated.

To avoid possible oil loss, DO NOT operate the vehicle with the

engine oil level dipstick and/or the engine oil filler cap removed.

Maintenance and Specifications

328

2012 Expedition (exd)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 323 324 325 326 327 328 329 330 331 332 333 ... 399 400

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 Expedition v.1 Manuel d'utilisateur Page 328

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 Expedition v.1