Ford 2012 Expedition v.1 Manuel d'utilisateur télécharger pdf (Page 264)

Use the side mirrors and rearview mirror to get better coverage on both

sides and rear of the vehicle.

Image delay if displayed through the rearview mirror:

When shifting out of R (Reverse) and into any other gear, the image in

the rearview mirror will remain on for a few seconds before it shuts off

to assist in parking or trailer hookup.

Image delay if displayed through the navigation screen:

After shifting out of R (Reverse) and into any gear other than P (Park),

the image in the navigation screen will remain until the vehicle speed

reaches 5 mph (8 km/h), only if the rear camera delay feature is on, or

until any navigation radio button is pressed.

Note: The default setting for the camera delay is off. Press the

“Settings” button found on the navigation screen (if equipped) to set the

camera delay feature to on or off.

When towing, the camera system will only see what is being towed

behind the vehicle; this might not provide adequate coverage as it

usually provides in normal operation and some objects might not be

seen.

The camera lens for the camera is located on the liftgate, above the

license plate. Keep the lens clean so the video image remains clear and

undistorted. Clean the lens with a soft, lint-free cloth and non-abrasive

cleaner.

Note: If the camera system image is not clear or seems distorted, it may

be covered with water droplets, snow, mud or any other substance. If

this occurs, clean the camera lens before using the reverse camera

system.

WARNING: The camera system is a reverse aid supplement

device that still requires the driver to use it in conjunction with

the rearview mirror and the side mirrors for maximum coverage.

Driving

264

2012 Expedition (exd)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 259 260 261 262 263 264 265 266 267 268 269 ... 399 400

Pas de commentaire

Ford 2012 Expedition v.1 Manuel d'utilisateur Page 264