Ford 2009 Taurus X v.2 Manuel d'utilisateur télécharger pdf (Page 343)

The transmission fluid should be

within the cross-hatch area if at

normal operating temperature 149°F

(65°C).

High fluid level

Fluid levels above the safe range

may result in transmission failure.

An overfill condition of transmission

fluid may cause shift and/or

engagement concerns and/or possible damage.

High fluid levels can be caused by an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick and also in the

Maintenance product specifications and capacities section in this

chapter.

Use of a non-approved automatic transmission fluid may cause

internal transmission component damage.

If necessary, add fluid in 1/2 pint

(250 ml) increments through the

filler tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by an authorized

dealer.

An overfill condition of

transmission fluid may cause shift and/or engagement concerns

and/or possible damage.

Do not use supplemental transmission fluid additives, treatments or

cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

AIR FILTER

Refer to scheduled maintenance information for the appropriate

intervals for changing the air filter element.

When changing the air filter element, use only the air filter element

listed. Refer to Motorcraft part numbers in this chapter.

2009 Taurus X (219)

Owners Guide, 2nd Printing

USA (fus)

Maintenance and Specifications

343

1 2 ... 338 339 340 341 342 343 344 345 346 347 348 ... 357 358

Pas de commentaire

Ford 2009 Taurus X v.2 Manuel d'utilisateur Page 343