Introduction 4Instrument Cluster 12Warning lights and chimes 12Gauges 17Entertainment Systems 20AM/FM stereo 20AM/FM stereo with single CD 22AM/FM ste
These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Airbag - FrontAirbag
Children and booster seats vary widely in size and shape. Choose abooster that keeps the lap belt low and snug across the hips, never upacross the sto
Never use pillows, books, or towels to boost a child. They canslide around and increase the likelihood of injury or death in acollision.SAFETY SEATS F
Ford recommends the use of a child safety seat having a top tetherstrap. Install the child safety seat in a seating position with LATCH andtether anch
2. Pull down on the shoulder beltand then grasp the shoulder beltand lap belt together.3. While holding the shoulder andlap belt portions together, ro
5. To put the retractor in theautomatic locking mode, grasp theshoulder portion of the belt and pulldownward until all of the belt isextracted.6. Allo
Attaching safety seats with tether strapsChildren should be placed in the rear in an appropriate childsafety seat that is properly secured to the vehi
1. Position the child safety seat onthe front right-hand passenger seat.2. Adjust the front right-handpassenger seat full forward.3. Route the child s
5. Adjust the front right handpassenger seat to the full rearwardposition.6. Install the child safety seat tightly using the LATCH anchors or safetybe
1. Position the child safety seat onthe second row left hand or righthand bucket seat.2. Route the child safety tetherstrap over the back of the left
2. Route the child safety tetherstrap over the back of the benchseat.3. Clip the center tether strap hookto the tether bracket mountedunder rear rail
Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleasePanic Alarm Engine Oi
Your vehicle may be equipped with LATCH anchors for child seatinstallation at the seating positions marked with the child seat symbol:• Five passenger
• Fifteen passenger wagonrepresents LATCH anchors.represents tether strap anchors.Never attach two LATCH child safety seats to the same anchor.In a cr
Each time you use the safety seat, check that the seat is properlyattached to the lower anchors and tether anchor. Try to tilt the childseat from side
NOTICE TO UTILITY VEHICLE AND TRUCK OWNERSUtility vehicles and trucks handledifferently than passenger cars inthe various driving conditions thatare e
VEHICLE CHARACTERISTICSHow your vehicle differs from other vehiclesSUV and trucks can differ fromsome other vehicles in a fewnoticeable ways. Your veh
INFORMATION ABOUT UNIFORM TIRE QUALITY GRADINGTire Quality Grades apply to newpneumatic passenger car tires. TheQuality grades can be found whereappli
The traction grade assigned to this tire is based onstraight-ahead braking traction tests, and does not includeacceleration, cornering, hydroplaning o
• Recommended inflation pressure: The cold inflation pressure foundon the Safety Compliance Certification Label or Tire Label located onthe B-Pillar o
Always inflate your tires to the Ford recommended inflation pressureeven if it is less than the maximum inflation pressure information foundon the tir
5. Repeat this procedure for each tire, including the spare.Note: Some spare tires operate at a higher inflation pressure than theother tires. For T-t
WARNING LIGHTS AND CHIMESWarning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A wa
Tire inflation informationAll tires with Steel Carcass Plies (if equipped):This type of tire utilizes steel cords in the sidewalls. As such, theycanno
Stay out of the trajectory (1) as indicated in the illustration.TIRE CAREInspecting your tiresPeriodically inspect the tire treads for uneven or exces
Improper or inadequate vehicle maintenance can cause tires to wearabnormally. Inspect all your tires, including the spare, frequently, andreplace them
U.S. DOT Tire Identification Number (TIN)Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the s
When mounting replacement tires and wheels, you should notexceed the maximum pressure indicated on the sidewall of thetire to set the beads without ad
• Do not run over curbs or hit the tire against a curb when parkingIf your vehicle is stuck in snow, mud, sand, etc., do not rapidlyspin the tires; sp
• Rear Wheel Drive (RWD)vehicles/Four Wheel Drive(4WD)/ All Wheel Drive (AWD)vehicles (front tires at top ofdiagram)Sometimes irregular tire wear can
• DRW – Six tire rotationIf your vehicle is equipped with dualrear wheels it is recommended thatthe front and rear tires (in pairs) berotated only sid
Information on “P” type tiresP215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (
Note: You may not find this information on all tires because it is notrequired by federal law.Letter rating Speed rating - mph (km/h)M 81 mph (130 km/
Under engine misfire conditions, excessive exhaust temperaturescould damage the catalytic converter, the fuel system, interiorfloor coverings or other
12. Treadwear, Traction and Temperature Grades• Treadwear: The treadwear grade is a comparative rating based on thewear rate of the tire when tested u
Additional information contained on the tire sidewall for “LT” typetires“LT” type tires have some additionalinformation beyond those of “P”type tires;
Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8
TIRE PRESSURE MONITORING SYSTEM (TPMS) (IF EQUIPPED)Each tire, including the spare (ifprovided), should be checkedmonthly when cold and inflated tothe
The Tire Pressure Monitoring System complies with part 15 of the FCCrules and with RSS-210 of Industry Canada. Operation is subject to thefollowing tw
Understanding your Tire Pressure Monitoring System (TPMS)The Tire Pressure Monitoring System measures pressure in your fourroad tires and sends the ti
When you believe your system is not operating properlyThe main function of the Tire Pressure Monitoring System is to warn youwhen your tires need air.
Low TirePressureWarning LightPossiblecauseCustomer Action RequiredFlashing WarningLightSpare tire inuseYour temporary spare tire is inuse. Repair the
TPMS reset procedure (if applicable)This procedure is only required after tire rotation on vehicleswith different front and rear tire pressures.To det
TPMS reset toolA special TPMS reset tool has been provided with your vehicle to resetyour TPMS after tire rotation. The tool is located with your Owne
Anti-lock brake system: If theABS light stays illuminated orcontinues to flash, a malfunction hasbeen detected, have the systemserviced immediately by
3. Press and hold the brake pedal for two (2) seconds, then release.4. Turn the ignition to OFF/LOCK (DO NOT remove the key.)5. Cycle the ignition fro
1. Left front tire: Place the TPMS reset tool against the left front tirewhere the tire meets the rim, opposite from the valve stem (1) as shown.This
Rotation, pressure adjustment and TPMS reset exampleThe following example describes all the major steps involved in rotatingtires on a vehicle with di
Sensor position following tirerotationSensor 1: 50 psiSensor 2: 50 psiSensor 3: 80 psiSensor 4: 80 psiPressure adjustment without therequired TPMS res
Rotation, pressure adjustmentand successful completion of theTPMS reset procedureSensor 1: 80 psiSensor 2: 80 psiSensor 3: 50 psiSensor 4: 50 psiTire
• The suspension insulation and bumpers will help prevent vehicledamage. Do not remove these components from your vehicle whenusing snow tires and cha
Payload – is the combined weight of cargo and passengers that thevehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Lab
Example only:Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue load
GAWR (Gross Axle Weight Rating) – is the maximum allowableweight that can be carried by a single axle (front or rear). Thesenumbers are shown on the S
GCW (Gross Combined Weight) – is the weight of the loaded vehicle(GVW) plus the weight of the fully loaded trailer.GCWR (Gross Combined Weight Rating)
Loading chapter. When the ignition is first turned to ON, the light willilluminate for 3 seconds to ensure the bulb is working. If the light doesnot t
Exceeding any vehicle weight rating limitation could result inserious damage to the vehicle and/or personal injury.Steps for determining the correct l
cement to your home? If you and your friend each weigh 220 lb.(99 kg), the calculation would be: 1400 - (2 x 220) - (12 x 100) = 1400 -440 - 1200 = -
GCWR (Gross Combined Weight Rating)/Trailer WeightsEngineRearaxleratioMaximumGCWR - lb.(kg)MaximumLoadedTrailer Weight- lb. (kg)Maximumfrontal area of
GCWR (Gross Combined Weight Rating)/Trailer WeightsEngineRearaxleratioMaximumGCWR - lb.(kg)MaximumLoadedTrailer Weight- lb. (kg)Maximumfrontal area of
GCWR (Gross Combined Weight Rating)/Trailer WeightsEngineRearaxleratioMaximumGCWR - lb.(kg)MaximumLoadedTrailer Weight- lb. (kg)Maximumfrontal area of
GCWR (Gross Combined Weight Rating)/Trailer WeightsEngineRearaxleratioMaximumGCWR - lb.(kg)MaximumLoadedTrailer Weight- lb. (kg)Maximumfrontal area of
GCWR (Gross Combined Weight Rating)/Trailer WeightsEngineRearaxleratioMaximumGCWR - lb.(kg)MaximumLoadedTrailer Weight- lb. (kg)Maximumfrontal area of
GCWR (Gross Combined Weight Rating)/Trailer WeightsEngineRearaxleratioMaximumGCWR - lb.(kg)MaximumLoadedTrailer Weight- lb. (kg)Maximumfrontal area of
GCWR (Gross Combined Weight Rating)/Trailer WeightsEngineRearaxleratioMaximumGCWR - lb.(kg)MaximumLoadedTrailer Weight- lb. (kg)Maximumfrontal area of
HitchesDo not use or install hitches that clamp onto the bumper or to the axle.Underbody hitches are acceptable if installed properly.Safety chainsAlw
Overdrive off: Illuminates whenthe overdrive function of thetransmission has been turned off,refer to the Driving chapter. If thelight does not illumi
Driving while you towWhen towing a trailer:• To ensure proper “break-in” of powertrain components, do not trailertow during the first 1,000 miles (160
• Do not tow a trailer for the first 500 miles (800 km) after changingthe rear axle lube.• After you have traveled 50 miles (80 km), thoroughly check
STARTINGPositions of the ignition1. ACCESSORY, allows the electricalaccessories such as the radio tooperate while the engine is notrunning.2. LOCK, lo
Do not start your vehicle in a closed garage or in other enclosedareas. Exhaust fumes can be toxic. Always open the garage doorbefore you start the en
• Turn the key to 4 (ON) withoutturning the key to 5 (START).Some warning lights will briefly illuminate. See Warning lights andchimes in the Instrume
You may experience a decrease in peak performance when the engine iscold when operating on E85ethanol.Do not crank the engine for more than 30 seconds
See Cold weather starting in the Driving chapter for more informationon starting with ethanol.Failure to follow engine block heater instructions could
become very hot and may result in an electrical shock or fire. Be sureto check for heat anywhere in the electrical hookup once the systemhas been oper
Using ABSWhen hard braking is required, apply continuous force on the brakepedal; do not pump the brake pedal since this will reduce theeffectiveness
your vehicle in an emergency. Since the parking brake applies only therear brakes, the vehicle’s stopping distance will increase greatly and thehandli
GAUGESSpeedometer: Indicates thecurrent vehicle speed.Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtempera
ADVANCETRAC姞 (ELECTRONIC STABILITY CONTROL) WITHROLL STABILITY CONTROL™ (RSC) (IF EQUIPPED)The AdvanceTrac威 with RSC system provides stability and tra
Driving conditions which may activate AdvanceTrac威 with RSC systeminclude:• Taking a turn too fast.• Maneuvering quickly to avoid an accident, pedestr
The AdvanceTrac威 with RSC systemwarning indicator light may flash toindicate the system is not fullyinitialized. If this happens, slowdown. If the lig
Do not alter or modify your vehicle’s suspension, steering ortires; the resulting changes to the vehicle’s handling canadversely affect the AdvanceTra
PREPARING TO DRIVEUtility vehicles have a significantly higher rollover rate thanother types of vehicles.In a rollover crash, an unbelted person is si
drivers to drive the van on a regular basis. These drivers will gainvaluable experience handling the van. This experience will help makeeach trip safe
AUTOMATIC TRANSMISSION OPERATIONBrake-shift interlockThe vehicle is equipped with a brake-shift interlock feature that preventsthe gearshift lever fro
Always set the parking brake fully and make sure the gearshift islatched in P (Park). Turn the ignition to the LOCK position andremove the key wheneve
Always set the parking brake fully and make sure the gearshift islatched in P (Park). Turn the ignition to the LOCK position andremove the key wheneve
2 (Second)This position allows for second gear only.• Provides engine braking.• Use to start-up on slippery roads.• To return to(Overdrive), move the
Trip odometer: Registers the miles(kilometers) of individual journeys.Press the SELECT/RESET controlonce to switch from the odometer tothe trip odomet
P (Park)This position locks the transmission and prevents the rear wheels fromturning.To put your vehicle in gear:• Start the engine• Depress the brak
The TOW HAUL indicator light willilluminate in the instrument cluster.Tow/Haul delays upshifts to reduce frequency of transmission shifting.Tow/Haul a
• Depress the accelerator to the floor.• Allows transmission to select an appropriate gear.Understanding the shift positions of the 5–speed automatict
D (Drive) without OverdriveD (Drive) without Overdrive can beactivated by pressing thetransmission control switch (TCS)on the end of the gearshift lev
If your vehicle goes off the edge of the pavement• If your vehicle goes off the edge of the pavement, slow down, butavoid severe brake application, ea
To help avoid personal injury, always use caution when inreverse and when using the RSS.This system is not designed to prevent contact with small ormo
The RSS automatically turns onwhen the gearshift lever is placed inR (Reverse) and the ignition is ON.An RSS control allows the driver toturn the RSS
DRIVING THROUGH WATERIf driving through deep or standingwater is unavoidable, proceed veryslowly especially when the depth isnot known. Never drive th
ROADSIDE ASSISTANCEGetting roadside assistanceTo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside
Canadian customers refer to your Customer Information Guidefor information on:• coverage period• exact fuel amounts• towing of your disabled vehicle•
Fuel gauge: Indicatesapproximately how much fuel is leftin the fuel tank (when the ignitionis in the ON position). The fuelgauge may vary slightly whe
HAZARD FLASHER CONTROLThe hazard flasher is located on thesteering column, just behind thesteering wheel. The hazard flasherswill operate when the ign
Except for commercial strippedchassis vehicles, this switch islocated in the front passenger’sfootwell, by the kick panel.On commercial stripped chass
FUSES AND RELAYSFusesIf electrical components in thevehicle are not working, a fuse mayhave blown. Blown fuses areidentified by a broken wire withinth
To remove a fuse use the fuse puller tool provided on the fuse panelcover.The fuses are coded as follows.Fuse/RelayLocationFuse AmpRatingPassenger Com
Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description8 15A Radio capacitor(s), Ignition coils,PCM (Powertrain Control Module)rel
Fuse/RelayLocationFuse AmpRatingPassenger Compartment FusePanel Description29 10A Diagnostics30 15A Headlamps (high beam indicator),DRL31 10A Right he
If the battery has been disconnected and reconnected, refer to theBattery section of the Maintenance and Specifications chapter.The high-current fuses
Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription10 30A** Trailer tow electric brakecontroller11 40A** 4-Wheel Anti-lock Brake System(
Fuse/RelayLocationFuse AmpRatingPower Distribution BoxDescription27 10A* PCM KAPWR, Canister vent(gasoline engine only)28 — Not usedA — Fuel pump rela
Relay location Description1 Interior lamps2 Open3 Open4 Battery saverEngine compartment relay moduleThe engine compartment relay module is located in
Seating and Safety Restraints 70Seating 70Safety restraints 77Airbags 87Child restraints 96Tires, Wheels and Loading 113Tire information 115Tire infla
AUDIO SYSTEMSAM/FM stereo (if equipped)Driving while distracted can result in loss of vehicle control,accident and injury. Ford strongly recommends th
Note: The tire pressure monitoring system (TPMS) indicator light willilluminate when the spare tire is in use. To restore the full functionalityof the
When driving with one of the dissimilar spare tires listed above, do not:• Exceed 50 mph (80 km/h)• Load the vehicle beyond maximum vehicle load ratin
When driving with the full-size dissimilar spare tire/wheel additionalcaution should be given to:• Towing a trailer• Driving vehicles equipped with a
To remove the spare tire:1. Open the rear doors and removethe thumb screw and anti-theftbracket. If finger pressure will notremove the thumb screw, us
1. Block the wheel that is diagonally opposite the tire you are changing.On E-450 vehicles, the parking brake is on the transmission. Therefore,the ve
Replacing the tire1. Assemble the jack handle sections together and lock into the jack. Usethe jack handle to slide the jack under the vehicle.To less
Rear axle jacking points - E-350Dual Rear Wheel (DRW) andE-450:Front axle jacking points:Place the jack under the pin on thefront surface of the front
5. Remove the jack and fully tighten the lug nuts in the following pattern(Refer to Wheel lug nut torque specifications later in this chapter forthe p
4. Check that the tire lies flat against the frame and is properlytightened. Try to push or pull, then turn the tire to be sure it will notmove. Loose
When a wheel is installed, always remove any corrosion, dirt orforeign materials present on the mounting surfaces of the wheelor the surface of the wh
3. AM/FM: Press to choose afrequency band in radio mode.4. Memory preset buttons: To seta station: Select frequency bandAM/FM1/FM2; tune to a station,
Preparing your vehicleWhen the battery is disconnected or a new battery is installed, theautomatic transmission must relearn its shift strategy. As a
2. Connect the other end of the positive (+) cable to the positive (+)terminal of the assisting battery.3. Connect the negative (-) cable to the negat
4. Make the final connection of the negative (-) cable to an exposedmetal part of the stalled vehicle’s engine, away from the battery and thecarbureto
Removing the jumper cablesRemove the jumper cables in the reverse order that they wereconnected.1. Remove the jumper cable from the ground metal surfa
3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of
WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y
Emergency TowingIn case of a roadside emergency with a disabled vehicle (without accessto wheel dollies, car hauling trailer, or flatbed transport veh
GETTING THE SERVICES YOU NEEDAt homeYou must take your Ford vehicle to an authorized dealer for warrantyrepairs. While any authorized dealer handling
In Canada:Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caAway
In the United States, a warranty dispute must be submitted to the BBBAUTO LINE before taking action under the Magnuson-Moss WarrantyAct, or to the ext
Satellite Compatible AM/FM Stereo In-Dash Single CD/MP3 Radio(if equipped)Driving while distracted can result in loss of vehicle control,accident and
THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM(U.S. ONLY)Your satisfaction is important to Ford Motor Company and to your dealer.Experience has sh
UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY)For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to fee
If you did not take advantage of the Ford Extended Service Plan at thetime of purchasing your vehicle, you may still be eligible. Since thisinformatio
ORDERING ADDITIONAL OWNER’S LITERATURETo order the publications in this portfolio, contact Helm, Incorporated at:HELM, INCORPORATEDP.O. Box 07150Detro
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at1–888–327–4236 (TTY: 1–800–424–9153); go to http://www.safercar.gov;or write to:
WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft Detail Wash (ZC-3-A), which is
• After polishing chrome bumpers, apply a coating of MotorcraftPremium Liquid Wax (ZC-53-A), available from your authorized dealer,or an equivalent qu
• Some automatic car washes may cause damage to the finish on yourwheel rims or covers. Chemical-strength cleaners, or cleaningchemicals, in combinati
PLASTIC (NON-PAINTED) EXTERIOR PARTSUse only approved products to clean plastic parts. These products areavailable from your authorized dealer.• For r
INSTRUMENT PANEL/INTERIOR TRIM AND CLUSTER LENSClean the instrument panel, interior trim areas and cluster lens with aclean and damp white cotton clot
The last text field shown on the display will become the new displaymessage default.TEXT is also available when equipped with Satellite radio. Your ra
• If a ring forms on the fabric after spot cleaning, clean the entire areaimmediately (but do not oversaturate) or the ring will set.• Do not use hous
FORD AND LINCOLN MERCURY CAR CARE PRODUCTSYour Ford or Lincoln Mercury authorized dealer has many qualityproducts available to clean your vehicle and
SERVICE RECOMMENDATIONSTo help you service your vehicle, we provide scheduled maintenanceinformation which makes tracking routine service easy.If your
OPENING THE HOOD1. Inside the vehicle, pull the hoodrelease handle located under thebottom left corner of the instrumentpanel.2. Go to the front of th
IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENTEngine compartment component locationsRefer to the 6.0L and 6.4L Power Stroke Direct Injection Turbo D
WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer
Poor wiper quality can be improved by cleaning the wiper blades and thewindshield, refer to Windows and wiper blades in the Cleaningchapter.To prolong
• If the oil level is below the lowerhole or the MIN mark, addenough oil to raise the levelwithin the lower and upper holesor within the MIN-MAX range
Engine oil and filter recommendationsLook for this certificationtrademark.Use SAE 5W-20 engine oilOnly use oils “Certified For Gasoline Engines” by th
BATTERYYour vehicle is equipped with aMotorcraft maintenance-free batterywhich normally does not requireadditional water during its life ofservice.If
Autoset: Press MENU until AUTOSET appears in the display. Press SELto toggle ON/OFF. Allows you to set the strongest local radio stationswithout losin
When lifting a plastic-cased battery, excessive pressure on theend walls could cause acid to flow through the vent caps,resulting in personal injury a
• If you do not allow the engine to relearn its idle trim, the idle qualityof your vehicle may be adversely affected until the idle trim iseventually
• Enables calibrated gauges to work properly.When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should
Do not add engine coolant when the engine is hot. Steam andscalding liquids released from a hot cooling system can burn youbadly. Also, you can be bur
coolant degas system with a pressurized cap, or if it is necessary toremove the coolant pressure relief cap on the radiator of a vehicle withan overfl
Recycled engine coolantFord Motor Company does NOT recommend the use of recycled enginecoolant in vehicles originally equipped with Motorcraft Premium
• Refer to the chart on the coolant container to ensure thecoolant concentration in your vehicle will provide adequateprotection at the temperatures i
operation and the engine will run rough. Remember that the engine iscapable of completely shutting down automatically to prevent enginedamage, therefo
Automotive fuels can cause serious injury or death if misused ormishandled.Fuel ethanol and gasoline may contain benzene, which is acancer-causing age
“Fuel Ethanol ”. To identify if your vehicle is an FFV, it may beequipped with a yellow fuel cap with the writing “E85/Gasoline”, orcheck if there is
17. BAND: Press to toggle betweenAM/FM1/FM2 frequency band.18. Memory presets: To set astation: Select frequency band; tuneto a station, press and hol
RefuelingFuel vapor burns violently and a fuel fire can cause severeinjuries. To help avoid injuries to you and others:• Read and follow all the instr
At the next opportunity, safely pull off of the road, remove the fuel fillercap, align the cap properly and reinstall it. The check fuel caplightor “c
If your vehicle is not a flexible fuel vehicle (FFV), then only useUNLEADED fuel or UNLEADED fuel blended with a maximum of 10%ethanol. Your vehicle w
Fuel qualityMany of the world’s automakers approved the World-Wide Fuel Charterthat recommends gasoline specifications to provide improvedperformance
If you have run out of fuel:• You may need to cycle the ignition from OFF to ON several times afterrefueling to allow the fuel system to pump the fuel
• Use the same filling rate setting (low — medium — high) each timethe tank is filled.• Allow no more than two automatic click-offs when filling.• Alw
• Idling for long periods of time (greater than one minute) may wastefuel.• Anticipate stopping; slowing down may eliminate the need to stop.• Sudden
• Fuel economy may decrease with lower temperatures during the first8–10 miles (12–16 km) of driving.• Driving on flat terrain offers improved fuel ec
Do not park, idle, or drive your vehicle in dry grass or other dryground cover. The emission system heats up the enginecompartment and exhaust system,
4. Driving through deep water—the electrical system may be wet.These temporary malfunctions can be corrected by filling the fuel tankwith good quality
CAT: CAT is only available when equipped with Satellite Radio. Yourradio comes equipped with Satellite ready capability. The kit to enableSatellite re
15 minutes of steady driving on an expressway/highway followed by 20minutes of stop-and-go driving with at least four 30-second idle periods.Allow the
For E-350 and E-450 vehicles with the Hydro-Boost BrakeSystem, do not press the brake pedal after the engine has beenturned off. Pressing the brake pe
DRIVELINE UNIVERSAL JOINT AND SLIP YOKEYour vehicle may be equipped with universal joints that requirelubrication. Refer to the scheduled maintenance
Low fluid levelDo not drive the vehicle if the fluid level is at the bottom of the dipstickand the ambient temperature is above 50°F (10°C).Correct fl
The transmission fluid should be in this range if at normal operatingtemperature (150°F-170°F [66°C-77°C]).The transmission fluid should be in this ra
High fluid levelFluid levels above the safe range may result in transmission failure.An overfill condition of transmission fluid may cause shift and/o
An overfill condition of transmission fluid may cause shift and/orengagement concerns and/or possible damage.Do not use supplemental transmission flui
Changing the air filter element1. Disconnect the fresh air inlet tubefrom the radiator support.2. Open the clamp that secures thetwo halves of the air
MOTORCRAFT PART NUMBERSComponent14.6L V8engine5.4L V8engine6.8L V10engineAir filter element FA-1632 FA-1632 FA-1632Battery- standard /(auxiliary)BXT-6
MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIESItem Capacity Ford part nameFord part number /Ford specificationBrake fluidBetween MINand MAX onreser
1. SEEK: Press and releaseSEEK/ for previous/nextstrong station or track.2. TEXT: The filename (Fi), songtitle (So), artist text (Ar) or albumtext (AL
Item Capacity Ford part nameFord part number /Ford specificationEngine coolant-diesel engine1Refer to the 6.0L and 6.4L Power Stroke Direct Injection
Item Capacity Ford part nameFord part number /Ford specificationDana Limited Slip Axle fluidM60 (M248)E250/E3505.9 pints(2.8L)5,7SAE 90 Hypoid Gear Oi
Item Capacity Ford part nameFord part number /Ford specificationFuel tank–all regular and extendedlength vans and wagons35.0 gallons(132.4L)——Fuel tan
ENGINE DATAEngine*4.6L V8engine5.4L V8engine6.8L V10 engineCubic inches 281 330 415Required fuel87 octane or(E-85)287 octane 87 octaneFiring order 1-3
• 4.6L V8 and 5.4L V8 Engines with A/C• 6.8L V10 EngineVEHICLE IDENTIFICATION NUMBERComplete Ford built vehiclesThe vehicle identification number is a
• On the certification label. Thislabel is required by the NationalHighway Traffic SafetyAdministration and is made ofspecial material. If it is tampe
TRANSMISSION/TRANSAXLE CODE DESIGNATIONSYou can find atransmission/transaxle code on theSafety Compliance CertificationLabel. The following table tell
GENUINE FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Ford Accessories are available for yourvehicle through your local Ford or Ford of
Peace of mindMobile-Ease™ hands-free communication systemRemote startVehicle security systemsFor maximum vehicle performance, keep the following infor
AAccessory delay ...52AdvanceTrac ...170Air cleaner filter ...266–268Airbag supplemental
8. Balance: Press BAL; then pressSEL/ to shift sound to theleft/right speakers.Fade: Press FADE; then pressSEL/ to shift sound to therear/front speake
safety belts ...229washing ...225waxing ...226wheels ...
Exhaust fumes ...165FFail safe cooling ...246Flexible Fuel Vehicle (FFV) ...247Fluid capacities ...
KKeyless entry systemautolock ...58Keys ...68positions of the ignition ...
Safety belts(see Safety restraints) ...77–81Safety defects, reporting ..223–224Safety restraints ...77–81Belt-Minder威 ...
VVehicle Identification Number(VIN) ...274Vehicle loading ...145Ventilating your vehicle
285
286
287
288
13. FOLDER : Press to accessthe previous MP3 directory14. FF(Fast forward): In CD/MP3mode, press until desired selectionis reached.15. REW(Rewind): In
Maintenance and Specifications 232Engine compartment 234Engine oil 236Battery 239Engine coolant 241Fuel information 247Air filter(s) 266Part numbers 2
CD units are designed to play commercially pressed 4.75 in (12 cm)audio compact discs only. Due to technical incompatibility, certainrecordable and re
Radio reception factors:There are three factors that can affect radio reception:• Distance/strength: The further you travel from an FM station, thewea
HEATER ONLY SYSTEM(IF EQUIPPED)1. Fan speed adjustment: Controlsthe volume of air circulated in thevehicle.2. Temperature selection:Controls the tempe
MANUAL HEATING AND AIR CONDITIONING SYSTEM(IF EQUIPPED)1. Fan speed adjustment: Controlsthe volume of air circulated in thevehicle.2. Temperature sele
To aid in side window defogging/demisting in cold weather:1. Select MIX.2. Set the temperature control to maintain comfort.3. Set the fan speed to HI.
HEADLAMP CONTROL• The first position turns on theparking, tail, license plate andside marker lamps.• The outer position turns on theheadlamps.Battery
Daytime running lamps (DRL) (if equipped)Turns the headlamps on with a reduced output.To activate:• the ignition must be in the ON position and• the h
PANEL DIMMER CONTROLTo adjust the brightness of theinstrument panel, rotate the dimmercontrol clockwise/counterclockwisewhen the headlamp control is i
3. Turn on the low beam headlampsand open the hood.4. Locate the high intensity area ofthe beam pattern and place the topedge of the intensity zone ev
• (1) 8 feet (2.4 meters)• (2) Center height of lamp toground• (3) 25 feet (7.6 meters)• (4) Horizontal reference line2. Measure the height from thece
CALIFORNIA Proposition 65 WarningWARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known toth
TURN SIGNAL CONTROL• Push down to activate the leftturn signal.• Push up to activate the right turnsignal.INTERIOR LAMPSCargo and dome lamps with rear
Front and rear courtesy/readinglampsThe dome portion of the lamp, thecenter light, can be turned on whenthe headlamp control is rotated fullycountercl
Function Number ofbulbsTrade numberSide marker withsealed beam2 194Back-up lamps 2 3156K or 3156License plate lamp 1 168Stop/tail/turn/sidemarker lamp
4. Remove the bulb assembly byturning it counterclockwise andpulling it straight out.Handle a halogen headlamp bulb carefully and keep out ofchildren’
AerodynamicSealed beam3. Rotate the bulb socket counterclockwise and remove.4. Carefully pull the bulb straight out of the socket.To complete installa
Sealed beam3. Rotate the bulb socket counterclockwise and remove.4. Carefully pull the bulb straight out of the socket.To complete installation, follo
Replacing license plate lamp bulbs1. Turn the headlamp switch to OFFand then remove the two screwsand the license plate lamp assemblyfrom the rear doo
MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the
TILT STEERING WHEELTo adjust the steering wheel:1. Pull and hold the steering wheelrelease control toward you.2. Move the steering wheel up ordown unt
Storage compartment (if equipped)Press the release on the door toopen the storage compartment.The storage compartment may beused to secure sunglasses
SAFETY AND ENVIRONMENT PROTECTIONWarning symbols in this guideHow can you reduce the risk of personal injury to yourself or others? Inthis guide, answ
Electronic compass/temperature display (if equipped)Outside air temperatureThe outside temperature display iscontained in the overhead console.The tem
3. Press and hold the SELECTcontrol until VAR appears in thedisplay, then release. The displayshould show the current zonenumber.4. Press the SELECT c
To prevent the fuse from being blown, do not use the power point(s)over the vehicle capacity of 12 VDC/180W. If the power point or cigarlighter socket
INTERIOR MIRRORThe interior rear view mirror has two pivot points on the support armwhich lets you adjust the mirror UP or DOWN and from SIDE to SIDE.
Fold-away mirrorsThe mirrors can be manually folded forward or backwards for narrowspaces like driving through an automatic car wash or backing out of
Setting speed controlThe controls for using your speedcontrol are located on the steeringwheel for your convenience.1. Press the ON control and releas
Increasing speed while using speed controlThere are two ways to set a higherspeed:• Press and hold the SET ACCELcontrol until you get to thedesired sp
Turning off speed controlThere are two ways to turn off thespeed control:• Depress the brake pedal. This willnot erase your vehicle’spreviously set sp
KEYSThe key operates all locks on your vehicle. You should always carry asecond key with you in a safe place in case you require it in anemergency.If
Deactivating/activating autolock featureYour vehicle comes with the autolock feature disabled; there are twomethods to enable/disable this feature:• T
SPECIAL NOTICESNew Vehicle Limited WarrantyFor a detailed description of what is covered and what is not covered byyour vehicle’s New Vehicle Limited
Back cargo door lock (if equipped)The passenger side rear cargo doorhas a power door lock controlmounted on the inside of the door.When this lock is p
For vehicles equipped with manual door locks:• The front door locks can be locked by using either the key or themanual door lock.• In order to activat
• The rear door handle is located inthe rear door below the glass.To open the side or back cargo doors from the inside:1. Unlock the E-Guard Cargo Pro
The remote entry system allows youto lock or unlock all vehicle doorswithout a key. Note:• The lock and unlock featureswork when the ignition is in an
Switching from two step to one step door unlockingYour vehicle comes with two step unlocking enabled. With the vehiclelocked, unlocking can be switche
To replace the battery:1. Twist a thin coin between the twohalves of the remote entrytransmitter near the key ring. DONOT TAKE THE RUBBER COVERAND CIR
How to reprogram your remote entry transmittersYou must have all remote entry transmitters (maximum of four)available before beginning this procedure.
• the remote transmitter lock control is pressed, or• after 25 seconds of illumination.The dome lamp control (if equipped) must not be set to the off
Vehicles without the SecuriLock™ Passive Anti-theft system behave asfollows:• When the ignition is in the 2 (LOCK) position, the indicator will notfla
Please read and understand the entire procedure before you begin.1. Insert the first previouslyprogrammed coded key into theignition and turn the igni
Vehicle Modification Data RecordingSome aftermarket products may cause severe engine and/or transmissiondamage; refer to the What is not covered secti
SEATINGReclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in theevent of a colli
Pull lever up to adjust seatback.Before returning theseatback to its originalposition, make sure that cargo orany objects are not trappedbehind the se
Press to raise or lower the rearportion of the seat cushion.Press the control to move the seatforward, backward, up or down.REAR SEATSRear captains ch
Quick release captains chair (7 passenger configuration secondrow only)To remove the seat:1. Disengage the lap/shoulder beltfrom the seat by inserting
1. Position the seat to the floormount.2. Pull the seat latch handle downward to lock the seat in position.3. Make sure the safety belt is not twisted
2. Find the clips attached near theends of the lap/shoulder belts.3. Clip the end of the belt to thestationary portion of the shoulderbelt coming out
4. With assistance, pull the LH/RH seat latch release straps (1) (locatedbehind the latch mechanisms) to release the latch from the rear strikers.5. L
5. After the front LH/RH hooks are engaged to the LH/RH front strikerpins, pull LH/RH seat latch release straps to allow engagement of thelatch to the
In a rollover crash, an unbelted person is significantly more likelyto die than a person wearing a safety belt.Each seating position in your vehicle h
• Front and rear seatsAll safety restraints in the vehicle are combination lap and shoulderbelts. All of the passenger combination lap and shoulder be
Using your vehicle as an ambulanceIf your light truck is equipped with the Ford Ambulance PreparationPackage, it may be utilized as an ambulance. Ford
How to use the automatic locking mode• Buckle the combination lap andshoulder belt.• Grasp the shoulder portion andpull downward until the entirebelt
BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED ifthe safety belt assembly “automatic locking retractor” feature orany other safety belt function is not
Safety belt warning light and indicator chimeThe safety belt warning light illuminates in the instrument cluster and achime sounds to remind the occup
If... Then...The driver’s safety belt is notbuckled approximately 5seconds after the safety beltwarning light has turned off...The Belt-Minder威 featur
Reasons given... Consider...“I was in a hurry” Prime time for an accident.Belt-Minder威 reminds us to take a fewseconds to buckle up.“Safety belts don’
Deactivating/activating the Belt-Minder姞 featureRead Steps1-5thoroughly before proceeding with thedeactivation/activation programming procedure.The Be
• This will enable the Belt-Minder威 feature for that seating position if itis currently disabled. As confirmation, the safety belt warning light willf
Failure to inspect and if necessary replace the safety beltassembly under the above conditions could result in severepersonal injuries in the event of
Always transport children 12 years old and under in the backseat and always properly use appropriate child restraints. Neverplace a rear-facing child
Children and airbagsChildren must always be properlyrestrained. Accident statisticssuggest that children are safer whenproperly restrained in the rear
Using your vehicle as a stationary power source (PTO)Refer to the Driving chapter for more information and guidelines foroperating a vehicle equipped
The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt
Determining if the system is operationalThe SRS uses a readiness light in the instrument cluster or a tone toindicate the condition of the system. Ref
Passenger airbag ON/OFF switch (if equipped)Note: The passenger airbag ON/OFFswitch (if equipped) may be onvehicles with no rear seats and agross vehi
In order to avoid inadvertent activation of the switch, alwaysremove the ignition key from the passenger air bag ON/OFFswitch.An infant in a rear-faci
If your vehicle has rear seats, always transport children who are 12and younger in the rear seat. Always use safety belts and childrestraints properly
• the child has a medical condition which, according to the child’sphysician, makes it necessary for the child to ride in the front seat sothat the dr
• the child has a medical condition that, according to the child’sphysician, makes it necessary for the child to ride in the front seat sothat the dri
Never let a passenger hold a child on his or her lap while thevehicle is moving. The passenger cannot protect the child frominjury in a collision.Alwa
Do not leave children, unreliable adults, or pets unattended inyour vehicle.Child booster seatsChildren outgrow a typical convertible or toddler seat
Types of booster seatsThere are two types of belt-positioning booster seats:• Those that are backless.If your backless booster seat has aremovable shi
Commentaires sur ces manuels