Ford 2009 Taurus X v.2 Manuel d'utilisateur télécharger pdf (Page 120)

Usually, when something affects the compass readings, the compass will

correct itself after a few days of operating your vehicle in normal

conditions. If the compass still appears to be inaccurate, a manual

calibration may be necessary. Refer to Compass zone/calibration

adjustment.

Most geographic areas (zones) have a magnetic north compass point that

varies slightly from the northerly direction on maps. This variation is four

degrees between adjacent zones and will become noticeable as the

vehicle crosses multiple zones. A correct zone setting will eliminate this

error. Refer to Compass zone/calibration adjustment.

Compass zone adjustment

Perform the following steps on an open area free from steel structures

and high voltage lines. For optimum calibration, turn off all electrical

accessories (heater / air conditioning, wipers, etc.) and make sure all

vehicle doors are shut.

1. Turn ignition to the on position.

2. Start the engine.

3. Determine your magnetic zone by

referring to the zone map.

4. Press the SETUP control

repeatedly until the message center

says “RESET FOR ZONE SETTING”.

5. Press the RESET control to enter

Zone Setting mode.

6. Press RESET repeatedly until the

desired zone setting is displayed.

The message center will

automatically exit zone setting mode

if enough time passes without

pressing a button.

123

6 7 8 9 1011

2009 Taurus X (219)

Owners Guide, 2nd Printing

USA (fus)

Driver Controls

120

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 357 358

Pas de commentaire

Ford 2009 Taurus X v.2 Manuel d'utilisateur Page 120