Ford 2009 Taurus v.3 Manuel d'utilisateur télécharger pdf (Page 270)

• Do not overfill the engine

with oil. Oil levels above this

mark may cause engine

damage. If the engine is

overfilled, some oil must be

removed from the engine by an

authorized dealer.

7. Put the dipstick back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to Checking the engine

oil in this chapter.

2. If the engine oil level is not within the normal operating range, add

only certified engine oil of the recommended viscosity. Remove the

engine oil filler cap and use a funnel to pour the engine oil into the

opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

normal operating range on the engine oil level dipstick.

4. Install the dipstick and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise

until it stops.

To avoid possible oil loss, DO NOT operate the vehicle with the

engine oil level dipstick and/or the engine oil filler cap removed.

Engine oil and filter recommendations

Look for this certification

trademark.

Use SAE 5W-20 engine oil

Only use oils “Certified For Gasoline Engines” by the American

Petroleum Institute (API). An oil with this trademark symbol conforms

Maintenance and Specifications

270

2009 Taurus (500)

Owners Guide (own2002), 3rd Printing

USA (fus)

1 2 ... 265 266 267 268 269 270 271 272 273 274 275 ... 308 309

Pas de commentaire

Ford 2009 Taurus v.3 Manuel d'utilisateur Page 270