Ford 2009 Mustang Manuel d'utilisateur télécharger pdf (Page 277)

Changing the air filter element (except Bullitt™* Mustang)

1. Release the clamps that secure

the air filter housing cover.

2. Carefully separate the two halves

of the air filter housing.

3. Remove the air filter element

from the air filter housing.

4. Wipe the air filter housing and

cover clean to remove any dirt or

debris and to ensure good sealing.

5. Install a new air filter element. Be

careful not to crimp the filter element edges between the air filter

housing and cover. This could cause filter damage and allow unfiltered

air to enter the engine if not properly seated.

6. Replace the air filter housing cover and secure the clamps. Be sure

that the air cleaner cover tabs are engaged into the slots of the air

cleaner housing.

*™&娀 Warner Bros. Entertainment Inc. (s07)

Changing the air filter element (Bullitt™* Mustang)

1. Remove the two screws that hold

the air filter assembly to the air

filter tray.

2. Lift the air filter element

assembly out from the air filter tray

by pulling it up and left slightly to

clear the retaining tab.

3. Loosen the air filter clamp bolt

enough to allow the air filter to slip

off the air filter tube easily.

4. Slip the air filter off from the air filter tube.

5. Install the new air filter by reversing Steps 1–4.

*™&娀 Warner Bros. Entertainment Inc. (s07)

Note: Failure to use the correct air filter element may result in severe

engine damage. The customer warranty may be void for any damage to

the engine if the correct air filter element is not used.

2009 05+ Mustang (197)

Owners Guide

USA (fus)

Maintenance and Specifications

277

1 2 ... 272 273 274 275 276 277 278 279 280 281 282 ... 291 292

Pas de commentaire

Ford 2009 Mustang Manuel d'utilisateur Page 277