Ford 2009 Mustang Manuel d'utilisateur télécharger pdf (Page 252)

2. If the engine oil level is not within the normal range, add only certified

engine oil of the recommended viscosity. Remove the engine oil filler cap

and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

normal operating range on the engine oil level dipstick.

4. Install the dipstick and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise

1/4 of a turn until three clicks are heard or until the cap is fully seated.

To avoid possible oil loss, DO NOT operate the vehicle with the

engine oil level dipstick and/or the engine oil filler cap removed.

Engine Oil Recommendations

4.0L V6 Engine

Look for this certification

trademark.

Use SAE 5W-30 engine oil

Only use oils “Certified For Gasoline Engines” by the American

Petroleum Institute (API). An oil with this trademark symbol conforms

to the current engine and emission system protection standards and fuel

economy requirements of the International Lubricant Standardization and

Approval Committee (ILSAC), comprised of U.S. and Japanese

automobile manufacturers.

To protect your engine and engine’s warranty, use Motorcraft SAE 5W-30

or an equivalent SAE 5W-30 oil meeting Ford specification

WSS-M2C929-A.

Do not use supplemental engine oil additives, cleaners or other engine

treatments. They are unnecessary and could lead to engine damage that

is not covered by Ford warranty.

Change your engine oil according to the appropriate schedule listed in

the scheduled maintenance information.

2009 05+ Mustang (197)

Owners Guide

USA (fus)

Maintenance and Specifications

252

1 2 ... 247 248 249 250 251 252 253 254 255 256 257 ... 291 292

Pas de commentaire

Ford 2009 Mustang Manuel d'utilisateur Page 252