Ford 2009 Focus v.2 Manuel d'utilisateur télécharger pdf (Page 177)

AUTOMATIC TRANSMISSION OPERATION (IF EQUIPPED)

Brake-shift interlock

This vehicle is equipped with a brake-shift interlock feature that prevents

the gearshift lever from being moved from P (Park) when the ignition is

in the on position unless the brake pedal is depressed.

If you cannot move the gearshift lever out of P (Park) with ignition in

the on position and the brake pedal depressed:

1. Apply the parking brake, turn ignition key to off, then remove the key.

2. Insert a tool into the access hole

and depress the override; while the

override is depressed, move the

shift lever to neutral.

3. Start the vehicle.

If it is necessary to use the above

procedure to move the gearshift

lever, it is possible that a fuse has

blown or the vehicle’s brakelamps

are not operating properly. Refer to

Fuses and relays in the Roadside

Emergencies chapter.

WARNING: Do not drive your vehicle until you verify that the

brakelamps are working.

WARNING: Always set the parking brake fully and make sure

the gearshift is latched in P (Park). Turn the ignition to the off

position and remove the key whenever you leave your vehicle.

WARNING: If the parking brake is fully released, but the brake

warning lamp remains illuminated, the brakes may not be

working properly. See your authorized dealer.

2009 Focus (foc)

Owners Guide, 2nd Printing

USA (fus)

Driving

177

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 264 265

Pas de commentaire

Ford 2009 Focus v.2 Manuel d'utilisateur Page 177