Ford 2009 Flex v.2 Manuel d'utilisateur télécharger pdf (Page 78)

Operating tips

• To reduce fog build up on the windshield during humid weather, place

the air flow selector in the

position.

• To reduce humidity build up inside the vehicle: do not drive with the

system off or with recirculated air engaged.

• Do not put objects under the front seats that will interfere with the

airflow to the back seats.

• Remove any snow, ice or leaves from the air intake area at the base of

the windshield.

• For maximum cooling performance (MAX A/C):

In AUTO mode, press AUTO control and set to desired temperature.

In manual override mode, select

or , A/C and recirculated

air

and set the temperature to 60°F (16°C). Set the fan to the

highest speed initially, then adjust to maintain passenger comfort.

• To improve the A/C cool down, drive with the windows slightly open

for 2–3 minutes after starting the vehicle or until the vehicle has

“aired out.”

In extremely cold temperatures, to maximize overall heater performance

it is suggested to not operate the auxiliary system (if equipped) until the

engine temperature gauge crosses into the normal operating range.

To aid in side window defogging/demisting in cold weather:

1. Select

2. Select A/C.

3. Adjust the temperature control to maintain comfort.

4. Set the fan to the highest speed.

5. Direct the outer instrument panel vents toward the side windows.

2009 Flex (471)

Owners Guide, 2nd Printing

USA (fus)

Climate Controls

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 377 378

Pas de commentaire

Ford 2009 Flex v.2 Manuel d'utilisateur Page 78