Ford 2007 F-150 v.3 Manuel d'utilisateur télécharger pdf (Page 120)

100

101

Compass zone/calibration adjustment

1. Determine your magnetic zone by

referring to the zone map.

2. Turn ignition to the ON position.

3. Start the engine.

4. From Info menu, select the

Compass/Odometer function. (Do

not select Trip, DTE, or AFE. The

top of the message center must be

blank).

5. Press and hold the SETUP and

RESET controls until the message

center display changes to show the

current zone setting (XX).

6. Press the RESET, then press

SETUP control repeatedly until the

correct zone setting for your

geographic location is displayed on

the message center. The range of

zone values are from 01 to 15 and “wraps” back to 01.

7. To exit the zone setting mode,

and to “lock in” your change, press

and release the RESET control.

Perform compass calibration in an open area free from steel structures

and high voltage lines. For optimum calibration, turn off all electrical

accessories (heater/air conditioning, wipers, etc.) and make sure all

vehicle doors are shut.

8. Press the RESET control to start

the compass calibration function.

9. Slowly drive the vehicle in a

circle (less than 3 mph [5 km/h])

until the CIRCLE SLOWLY TO

CALIBRATE display changes to CALIBRATION COMPLETED. It will take

up to five circles to complete calibration.

123

6 7 8 9 1011

2007 F-150 (f12)

Owners Guide (post-2002-fmt)

USA (fus)

Driver Controls

120

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 375 376

Commentaires sur ces manuels

Pas de commentaire

Ford 2007 F-150 v.3 Manuel d'utilisateur Page 120

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2007 F-150 v.3