Ford 2007 E-450 v.1 Manuel d'utilisateur télécharger pdf (Page 181)

7. Use the tapered end of the lug nut wrench to unscrew wheel

ornaments attached by retaining screws. Remove any wheel trim. Insert

the tapered end of the lug nut wrench behind wheel covers or hubcaps

and twist off.

8. Loosen the wheel nut by pulling up on the handle of the lug nut

wrench about one-half turn (counterclockwise). Do not remove the

wheel lug nuts until you raise the tire off the ground.

Replacing the tire

1. Assemble the jack handle sections together and lock into the jack. Use

the jack handle to slide the jack under the vehicle.

To lessen the risk of personal injury, do not put any part of your

body under the vehicle while changing a tire. Do not start the

engine when your vehicle is on the jack. The jack is only meant for

changing the tire.

2. Position the jack to raise the front or rear wheel.

• Never use the front or rear

differential as a jacking point.

2007 Econoline (eco)

Owners Guide (post-2002-fmt)

USA (fus)

Roadside Emergencies

181

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 263 264

Pas de commentaire

Ford 2007 E-450 v.1 Manuel d'utilisateur Page 181