Ford 2006 Crown Victoria Manuel d'utilisateur télécharger pdf (Page 112)

• Grasp the shoulder portion and

pull downward until the entire

belt is pulled out.

• Allow the belt to retract. As the belt retracts, you will hear a clicking

sound. This indicates the safety belt is now in the automatic locking

mode.

How to disengage the automatic locking mode

Ford Motor Company recommends that all passenger safety belt

assemblies and attaching hardware should be inspected by an

authorized dealer after any collision to verify that the ⬙automatic

locking retractor⬙ feature for child seats is still working properly. Safety

belt assemblies should be inspected by an authorized dealer and must

be replaced if either damage or improper operation is noted. Failure to

replace the belt and retractor assembly could increase the risk of

injury in a collision.

Unbuckle the combination lap/shoulder belt and allow it to retract

completely to disengage the automatic locking mode and activate the

vehicle sensitive (emergency) locking mode.

Front safety belt height adjustment

Your vehicle has safety belt height

adjustments for the driver and front

outboard passenger. Adjust the

height of the shoulder belt so the

belt rests across the middle of your

shoulder.

To lower the shoulder belt height,

push the button and slide the height

adjuster down. To raise the height

of the shoulder belt, push the

button and slide the height adjuster

up. Pull down on the height adjuster to make sure it is locked in place.

2006 Crown Victoria (cro)

Owners Guide (post-2002-fmt)

USA (fus)

Seating and Safety Restraints

112

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 271 272

Pas de commentaire

Ford 2006 Crown Victoria Manuel d'utilisateur Page 112