Ford 2006 Crown Victoria Manuel d'utilisateur télécharger pdf (Page 200)

5. Locate pry off notch (if

equipped) and remove the center

ornament from the aluminum wheel

with the tapered end of the wheel

nut wrench that came with your

vehicle. Insert and twist the handle,

then pry against the wheel.

6. If equipped with a full

wheelcover, remove the wheelcover

center ornament then loosen the five black plastic nuts which retain the

wheelcover using the lug wrench.

7. Loosen each wheel metal lug nut one-half turn counterclockwise but

do not remove them until the wheel is raised off the ground.

Before placing the jack under the vehicle, NOTE the jack location

markings:

JACK LOCATION

The jack location markings can be

found on the lower outer edge of

the body.

• Locate the jack locator mark (B)

on the body (C) near the tire you

are changing, then place the jack

(D) under the frame (A) of

the vehicle aligning it with the

mark (B).

• Position the jack according to the

following guides and turn the jack

handle clockwise until the wheel

is completely off the ground.

2006 Crown Victoria (cro)

Owners Guide (post-2002-fmt)

USA (fus)

Roadside Emergencies

200

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 271 272

Pas de commentaire

Ford 2006 Crown Victoria Manuel d'utilisateur Page 200