Ford 2015 F-550 v.2 Manuel d'utilisateur télécharger pdf (Page 249)

E142465

4. On the wall or screen you will observe

a flat zone of high intensity light

located at the top of the right hand

portion of the beam pattern. If the top

edge of the high intensity light zone is

not at the horizontal reference line, the

headlamp will need to be adjusted.

E163806

5. Locate the vertical adjuster on each

headlamp. Using a Phillips #2

screwdriver, turn the adjuster either

clockwise or counterclockwise in order

to adjust the vertical aim of the

headlamp.

6. Repeat steps 3 thru 5 to adjust the

other headlamp.

7. Close the hood and turn off the lamps.

Horizontal Aim Adjustment

Horizontal aim is not required for this

vehicle and is not adjustable.

REMOVING A HEADLAMP

WARNING

Handle a halogen headlamp bulb

carefully and keep out of children’s

reach. Grasp the bulb only by its

plastic base and do not touch the glass.

The oil from your hand could cause the

bulb to break the next time the headlamps

are operated.

Note: If the bulb is accidentally touched, it

should be cleaned with rubbing alcohol

before being used.

Note: This procedure is for replacing the

headlamps, park lamps or turn lamps.

1. Make sure the headlamp control is in

the Off position and open the hood.

246

Super Duty (), enUSA

Maintenance

1 2 ... 244 245 246 247 248 249 250 251 252 253 254 ... 467 468

Commentaires sur ces manuels

Pas de commentaire