Ford 2015 F-550 v.2 Manuel d'utilisateur télécharger pdf (Page 244)

TRANSFER CASE FLUID

CHECK (If Equipped)

E164246

1. Clean the filler plug.

2. Remove the filler plug and inspect the

fluid level.

3. Add only enough fluid through the filler

opening so that the fluid level is at the

bottom of the opening.

Only use fluid that meets Ford

specifications. See Capacities and

Specifications (page 300).

BRAKE FLUID CHECK

Fluid levels between the MIN and MAX

lines are within the normal operating range;

there is no need to add fluid. If the fluid

levels are outside of the normal operating

range, the performance of the system

could be compromised; seek service from

your authorized dealer immediately.

POWER STEERING FLUID

CHECK

Check the power steering fluid. See

Scheduled Maintenance (page 439). If

adding fluid is necessary, use only

MERCON LV ATF

Note: This procedure is for vehicles with

gasoline engines. Vehicles with diesel

engines are similar. See Under Hood

Overview in your diesel supplement.

Check the fluid level when it is at ambient

temperature.

1. Check the fluid level in the reservoir. It

should be between the MIN and MAX

range. Do not add fluid if the level is

within this range.

2. If the fluid level is low, add fluid to bring

the fluid level up to between the MIN

and MAX range.

3. Switch the engine on.

4. While the engine idles, turn the steering

wheel left and right several times.

5. Switch the engine off.

241

Super Duty (), enUSA

Maintenance

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 467 468

Commentaires sur ces manuels

Pas de commentaire