Ford 2013 Flex v.2 Manuel d'utilisateur télécharger pdf (Page 332)

100

101

• Standard load: A class of P-metric or Metric tires designed to carry a

maximum load at 35 psi [37 psi (2.5 bar) for Metric tires]. Increasing

the inflation pressure beyond this pressure will not increase the tire’s

load carrying capability.

• Extra load: A class of P-metric or Metric tires designed to carry a

heavier maximum load at 41 psi [43 psi (2.9 bar) for Metric tires].

Increasing the inflation pressure beyond this pressure will not increase

the tire’s load carrying capability.

• kPa: Kilopascal, a metric unit of air pressure.

• PSI: Pounds per square inch, a standard unit of air pressure.

• Cold inflation pressure: The tire pressure when the vehicle has

been stationary and out of direct sunlight for an hour or more and

prior to the vehicle being driven for 1 mile (1.6 km).

• Recommended inflation pressure: The cold inflation pressure found

on the Safety Compliance Certification Label (affixed to either the

door hinge pillar, door-latch post, or the door edge that meets the

door-latch post, next to the driver’s seating position), or Tire Label

located on the B-Pillar or the edge of the driver’s door.

• B-pillar: The structural member at the side of the vehicle behind the

front door.

• Bead area of the tire: Area of the tire next to the rim.

• Sidewall of the tire: Area between the bead area and the tread.

• Tread area of the tire: Area of the perimeter of the tire that

contacts the road when mounted on the vehicle.

• Rim: The metal support (wheel) for a tire or a tire and tube assembly

upon which the tire beads are seated.

332 Wheels and Tires

2013 Flex (471)

Owners Guide gf, 2nd Printing

USA (fus)

1 2 ... 327 328 329 330 331 332 333 334 335 336 337 ... 534 535

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Flex v.2 Manuel d'utilisateur Page 332

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Flex v.2