Ford 2013 Flex v.2 Manuel d'utilisateur télécharger pdf (Page 317)

100

101

Replacing rear stop/tail/turn/backup and side marker lamp bulbs

The stop/tail/turn/backup and side marker lamp bulbs are located in the

tail lamp assembly.

Note: Your vehicle may be equipped with a stop/tail/turn and side

marker lamp assemblies containing integral multiple light emitting diodes

(LED). If replacement is required, see your authorized dealer.

A. Backup lamp

B. Stop/tail/turn signal lamp

C. Side marker lamp

D. Supplemental taillamp

1. Make sure the headlamp switch is

in the off position and open the

liftgate.

2. Remove the hex screws in the

liftgate opening, then pull the lamp

assembly away from the vehicle. This will disengage two snap

attachments along the side of the vehicle.

3. Remove the bulb socket by rotating it counterclockwise, then pulling it

out of the lamp assembly.

4. Pull the bulb straight from the socket.

Install new bulb(s) in reverse order.

Replacing high-mount brake lamp bulbs

Your vehicle is equipped with an LED high-mount brake lamp. It is

designed to last the life of the vehicle. If replacement is required, it is

recommended that you see your authorized dealer.

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is in the off position.

2. Remove the two screws and the

license plate lamp assembly from the

liftgate.

Maintenance 317

2013 Flex (471)

Owners Guide gf, 2nd Printing

USA (fus)

1 2 ... 312 313 314 315 316 317 318 319 320 321 322 ... 534 535

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Flex v.2 Manuel d'utilisateur Page 317

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Flex v.2