Ford 2011 Fiesta v.2 Manuel d'utilisateur télécharger pdf (Page 244)

If you cannot move the gearshift lever out of P (Park) with ignition in

the on position and the brake pedal pressed, it is possible that a fuse has

blown or the vehicle’s brake lamps are not operating properly. Refer to

Fuses and relays in the Roadside Emergencies chapter.

If the fuse is not blown and the brake lamps are working properly, the

following procedure will allow you to move the gearshift lever from P

(Park):

1. Apply the parking brake, turn the

ignition key to the off position and

remove the key.

2. Using a screwdriver (or similar

tool), carefully pry off and remove

the passenger side console cover to

expose the inside of the shifter

assembly.

3. Locate the brake shift interlock

lever on the passenger side of the

shifter assembly.

4. Apply the brake pedal. Using a

screwdriver (or similar tool), press

and hold the brake shift interlock

lever forward below the metal blade

while pulling the gearshift lever out

of the P (Park) position and into

the N (Neutral) position.

5. Install the console cover.

6. Apply the brake pedal, start the vehicle and release the parking brake.

See your authorized dealer as soon as possible if this procedure

is used.

WARNING: Do not drive your vehicle until you verify that the

brake lamps are working.

WARNING: Always set the parking brake fully and make sure

the gearshift is latched in P (Park). Turn the ignition to the off

position and remove the key whenever you leave your vehicle.

Driving

244

2011 Fiesta (fie)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 357 358

Pas de commentaire

Ford 2011 Fiesta v.2 Manuel d'utilisateur Page 244