Ford 2011 Fiesta v.2 Manuel d'utilisateur télécharger pdf (Page 230)

STARTING

Positions of the ignition

If your vehicle is equipped with a push button start system, refer to

Push button start system in this section for ignition modes.

1. 0 (off) — locks the steering

wheel, automatic transmission

gearshift lever and allows key

removal. This position also shuts the

engine and all electrical accessories

off.

Note: In order to switch off the

engine while the vehicle is in

motion, shift to neutral and use the brakes to bring the vehicle to a safe

stop. After the vehicle has stopped, turn the engine off and shift into

park. Then turn the key to the accessory or off position.

2. I (accessory) — allows the electrical accessories such as the radio to

operate while the engine is not running.

3. II (on) — all electrical circuits operational. Warning lights illuminated.

Key position when driving.

4. III (start) — cranks the engine. Release the key as soon as the engine

starts.

Preparing to start your vehicle

Engine starting is controlled by the powertrain control system.

This system meets all Canadian interference-causing equipment standard

requirements regulating the impulse electrical field strength of radio

noise.

When starting a fuel-injected engine, don’t press the accelerator before

or during starting. Only use the accelerator when you have difficulty

starting the engine. For more information on starting the vehicle, refer to

Starting the engine in this chapter.

WARNING: Extended idling at high engine speeds can produce

very high temperatures in the engine and exhaust system,

creating the risk of fire or other damage.

Driving

230

2011 Fiesta (fie)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 357 358

Pas de commentaire

Ford 2011 Fiesta v.2 Manuel d'utilisateur Page 230