Ford 2011 F-550 v.4 Manuel d'utilisateur télécharger pdf (Page 343)

100

101

On all two-piece flat wheel nuts,

apply one drop of motor oil between

the flat washer and the nut.

WARNING: When a wheel is installed, always remove any

corrosion, dirt or foreign materials present on the mounting

surfaces of the wheel or the surface of the wheel hub, brake drum or

brake disc that contacts the wheel. Ensure that any fasteners that

attach the rotor to the hub are secured so they do not interfere with

the mounting surfaces of the wheel. Installing wheels without correct

metal-to-metal contact at the wheel mounting surfaces can cause the

wheel nuts to loosen and the wheel to come off while the vehicle is in

motion, resulting in loss of control.

Inspect the wheel pilot hole prior to

installation. If there is visible

corrosion in wheel pilot hole,

remove loose particles by wiping

with clean rag and apply grease.

Apply grease only to the wheel pilot

hole surface by smearing a “dime”

(1 square cm) sized glob of grease

around the wheel pilot surface (1)

with end of finger. DO NOT apply

grease to lug nut/stud holes or

wheel-to-brake surfaces.

JUMP STARTING

WARNING: The gases around the battery can explode if

exposed to flames, sparks, or lit cigarettes. An explosion could

result in injury or vehicle damage.

WARNING: Batteries contain sulfuric acid which can burn skin,

eyes and clothing, if contacted.

Roadside Emergencies

343

2011 F-250/350/450/550 (f23)

Owners Guide, 4th Printing

USA (fus)

1 2 ... 338 339 340 341 342 343 344 345 346 347 348 ... 448 449

Commentaires sur ces manuels

Pas de commentaire

Ford 2011 F-550 v.4 Manuel d'utilisateur Page 343

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2011 F-550 v.4