Ford 2011 F-550 v.4 Manuel d'utilisateur télécharger pdf (Page 146)

You can disable or enable the remote start system through the message

center. Refer to Message center in the Instrument Cluster chapter.

SECURICODE™ KEYLESS ENTRY SYSTEM (IF EQUIPPED)

You can use the keyless entry

keypad to lock or unlock the doors

without using a key.

The keypad can be operated with

the factory set 5–digit entry code;

this code is located on the owner’s wallet card in the glove box, is

marked on the computer module, and is available from your authorized

dealer. You can also create your own 5–digit personal entry code.

When pressing the controls on the keypad, press the middle of the

controls to ensure a good activation.

Programming a personal entry code and keypad association to

memory feature

To create your own personal entry code:

1. Enter the factory set code.

2. Within five seconds press the 1 • 2 on the keypad.

3. Enter your personal 5-digit code. Each number must be entered

within five seconds of each other.

4. To associate the entry code with a memory setting, enter a sixth digit

to indicate which driver should be set in a memory recalled by the

personal entry code:

• Pressing 1 • 2 recalls Driver 1 settings.

• Pressing 3 • 4 recalls Driver 2 settings.

• Pressing other keypad buttons or not pressing a keypad button as a

sixth digit does not set a driver and will not recall a memory setting.

Note: The factory-set code cannot be associated with a memory

setting.

5. The doors will again lock then unlock to confirm that your personal

entry code has been programmed to the module.

Tips:

• Do not set a code that uses five of the same number.

• Do not use five numbers in sequential order.

• The factory set code will work even if you have set your own personal

code.

Locks and Security

146

2011 F-250/350/450/550 (f23)

Owners Guide, 4th Printing

USA (fus)

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 448 449

Pas de commentaire

Ford 2011 F-550 v.4 Manuel d'utilisateur Page 146