Ford 2011 E-450 v.2 Manuel d'utilisateur télécharger pdf (Page 23)

HOLD RESET FOR SETUP MENU

Press and hold the SELECT/RESET stem to get into the setup menu

sequence for the following displays:

Note: When returning to the setup menu and a non-English language

has been selected, HOLD RESET FOR ENGLISH will be displayed to

change back to English. Press and hold the SELECT/RESET stem to

change back to English.

OIL LIFE XXX% HOLD RESET = NEW

This displays the remaining oil life.

An oil change is required whenever indicated by the message center and

according to the recommended maintenance schedule. USE ONLY

RECOMMENDED ENGINE OILS.

To reset the oil monitoring system to 100% after each oil change,

perform the following:

1. Press and release the SELECT/RESET stem to display “OIL LIFE

XXX% HOLD RESET = NEW”.

2. Press and hold the SELECT/RESET stem for two seconds and release

to reset the oil life to 100%.

Note: To change oil life 100% value to another value, proceed to Step 3.

3. Once “OIL LIFE SET TO XXX%” is displayed, release and press the

SELECT/RESET stem to change the oil life start value. Each release and

press will reduce the value by 10%.

UNITS ENG / METRIC

Displays the current units English or Metric.

Press and hold the SELECT/RESET stem to change from English to

Metric.

Press the SELECT/RESET stem for the next setup menu item or wait for

more than four seconds to return to the info menu.

AUTOLOCK (if equipped)

This feature automatically locks all vehicle doors when the vehicle is

shifted into any gear and when the vehicle is in motion over 13 mph

(20 km/h) or higher.

Press and hold the SELECT/RESET stem to turn this feature on or off.

Press the SELECT/RESET stem for the next setup menu item or wait for

more than four seconds to return to the info menu.

Instrument Cluster

2011 Econoline (eco)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 333 334

Pas de commentaire

Ford 2011 E-450 v.2 Manuel d'utilisateur Page 23