Ford 2011 E-450 v.2 Manuel d'utilisateur télécharger pdf (Page 198)

100

101

If the fuse is not blown and the brake lamps are working properly, the

following procedure will allow you to move the gearshift lever from P

(Park):

1. Apply the parking brake, and turn

the ignition to the on position.

2. Remove the lower trim panel

under the steering column. Make

sure to not disturb the wires on the

electrical connector.

3. Locate the brake-shift interlock

solenoid underneath the steering

column.

4. Pull back on the solenoid, and at

the same time, shift the

transmission into N (Neutral).

5. Start the vehicle.

See your authorized dealer as

soon as possible if this

procedure is used.

WARNING: Do not drive your vehicle until you verify that the

brake lamps are working.

WARNING: Always set the parking brake fully and make sure

the gearshift is latched in P (Park). Turn the ignition to the lock

position and remove the key whenever you leave your vehicle.

WARNING: If the parking brake is fully released, but the brake

warning lamp remains illuminated, the brakes may not be

working properly. See your authorized dealer.

Driving

198

2011 Econoline (eco)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 333 334

Commentaires sur ces manuels

Pas de commentaire

Ford 2011 E-450 v.2 Manuel d'utilisateur Page 198

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2011 E-450 v.2