Ford 2010 Transit Connect v.1 Manuel d'utilisateur télécharger pdf (Page 44)

Replacing reading bulbs

1. Open the reading lamp assembly.

2. Pull the bulb straight out and

replace it.

3. After the bulb has been replaced,

close the lamp assembly.

Install in reverse order.

Replacing exterior bulbs

Check the operation of all bulbs frequently.

Replacing headlamp bulbs

1. Make sure the headlamp control

is in the off position and open the

hood.

2. Pull off the bulb cap.

3. Disconnect electrical connector

from the bulb.

4. Twist off the bulb retainer ring by

turning it counterclockwise.

Install in reverse order.

WARNING: Handle a halogen headlamp bulb carefully and keep

out of children’s reach. Grasp the bulb by only its plastic base

and do not touch the glass. The oil from your hand could cause the

bulb to break the next time the headlamps are operated.

Note: If the bulb is accidentally touched, it should be cleaned with

rubbing alcohol before being used.

Lights

2010 Transit Connect (tst)

Owners Guide (own2002), 1st Printing

USA (fus)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 258 259

Pas de commentaire

Ford 2010 Transit Connect v.1 Manuel d'utilisateur Page 44