Ford 2010 Transit Connect v.1 Manuel d'utilisateur télécharger pdf (Page 189)

WHEEL LUG NUT TORQUE SPECIFICATIONS

Retighten the lug nuts to the specified torque within 100 miles (160 km)

after any wheel disturbance (rotation, flat tire, wheel removal, etc.).

Bolt size Wheel lug nut torque*

lb.ft. N•m

M12 x 1.5 66 90

* Torque specifications are for nut and bolt threads free of dirt and

rust. Use only Ford recommended replacement fasteners.

WARNING: When a wheel is installed, always remove any

corrosion, dirt or foreign materials present on the mounting

surfaces of the wheel or the surface of the wheel hub, brake drum or

brake disc that contacts the wheel. Ensure that any fasteners that

attach the rotor to the hub are secured so they do not interfere with

the mounting surfaces of the wheel. Installing wheels without correct

metal-to-metal contact at the wheel mounting surfaces can cause the

wheel nuts to loosen and the wheel to come off while the vehicle is in

motion, resulting in loss of control.

Note: Inspect the wheel pilot hole

prior to installation. If there is

visible corrosion in wheel pilot hole,

remove loose particles by wiping

with clean rag and apply grease.

Apply grease only to the wheel pilot

hole surface by smearing a “dime”

(1 square cm) sized glob of grease

around the wheel pilot surface (1)

with end of finger. DO NOT apply

grease to lugnut/stud holes or

wheel-to-brake surfaces.

Roadside Emergencies

189

2010 Transit Connect (tst)

Owners Guide (own2002), 1st Printing

USA (fus)

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 258 259

Pas de commentaire

Ford 2010 Transit Connect v.1 Manuel d'utilisateur Page 189