Ford 2010 Edge v.1 Manuel d'utilisateur télécharger pdf (Page 309)

The transmission fluid should be

within the cross-hatch area if at

normal operating temperature

180°F-200°F (82°C-93°C) .

High fluid level

Fluid levels above the safe range

may result in transmission failure.

An overfill condition of transmission

fluid may cause shift and/or

engagement concerns and/or possible damage.

High fluid levels can be caused by an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick and also in the

Maintenance product specifications and capacities section in this

chapter.

Use of a non-approved automatic transmission fluid may cause

internal transmission component damage.

If necessary, add fluid in 1/2 pint

(250 ml) increments through the

filler tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by an authorized

dealer.

An overfill condition of

transmission fluid may cause shift and/or engagement concerns

and/or possible damage.

Do not use supplemental transmission fluid additives, treatments or

cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

AIR FILTER

Refer to scheduled maintenance information for the appropriate

intervals for changing the air filter element.

When changing the air filter element, use only the air filter element

listed. Refer to Motorcraft part numbers in this chapter.

Maintenance and Specifications

309

2010 Edge (edg)

Owners Guide (own2002), 1st Printing

USA (fus)

1 2 ... 304 305 306 307 308 309 310 311 312 313 314 ... 327 328

Pas de commentaire

Ford 2010 Edge v.1 Manuel d'utilisateur Page 309