Ford 2010 Edge v.1 Manuel d'utilisateur télécharger pdf (Page 170)

5. To put the retractor in the

automatic locking mode, grasp the

shoulder portion of the belt and pull

downward until all of the belt is

pulled out.

6. Allow the belt to retract to remove slack. The belt will click as it

retracts to indicate it is in the automatic locking mode.

7. Try to pull the belt out of the retractor to make sure the retractor is

in the automatic locking mode (you should not be able to pull more belt

out). If the retractor is not locked, repeat Steps 5 and 6.

8. Remove remaining slack from the

belt. Force the seat down with extra

weight, e.g., by pressing down or

kneeling on the child restraint while

pulling up on the shoulder belt in

order to force slack from the belt.

This is necessary to remove the

remaining slack that will exist once

the additional weight of the child is

added to the child restraint. It also

helps to achieve the proper

snugness of the child seat to the

vehicle. Sometimes, a slight lean

towards the buckle will additionally

help to remove remaining slack from the belt.

9. Attach the tether strap (if the child seat is equipped). Refer to

Attaching child safety seats with tether straps later in this chapter.

Seating and Safety Restraints

170

2010 Edge (edg)

Owners Guide (own2002), 1st Printing

USA (fus)

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 327 328

Pas de commentaire

Ford 2010 Edge v.1 Manuel d'utilisateur Page 170