Ford 2009 Expedition v.2 Manuel d'utilisateur télécharger pdf (Page 338)

100

101

WHEEL LUG NUT TORQUE SPECIFICATIONS

Retighten the lug nuts to the specified torque within 100 miles (160 km)

after any wheel disturbance (tire rotation, changing a flat tire, wheel

removal, etc.).

Bolt size Wheel lug nut torque*

lb.ft. N•m

M14 x 2.0 150 200

* Torque specifications are for nut and bolt threads free of dirt and

rust. Use only Ford recommended replacement fasteners.

WARNING: When a wheel is installed, always remove any

corrosion, dirt or foreign materials present on the mounting

surfaces of the wheel or the surface of the wheel hub, brake drum or

brake disc that contacts the wheel. Ensure that any fasteners that

attach the rotor to the hub are secured so they do not interfere with

the mounting surfaces of the wheel. Installing wheels without correct

metal-to-metal contact at the wheel mounting surfaces can cause the

wheel nuts to loosen and the wheel to come off while the vehicle is in

motion, resulting in loss of control.

Note: Inspect the wheel pilot hole

prior to installation. If there is

visible corrosion in wheel pilot hole,

remove loose particles by wiping

with clean rag and apply grease.

Apply grease only to the wheel pilot

hole surface by smearing a “dime”

(1 square cm) sized glob of grease

around the wheel pilot surface (1)

with end of finger. DO NOT apply

grease to lugnut/stud holes or

wheel-to-brake surfaces.

2009 Expedition (exd)

Owners Guide, 2nd Printing

USA (fus)

Roadside Emergencies

338

1 2 ... 333 334 335 336 337 338 339 340 341 342 343 ... 414 415

Commentaires sur ces manuels

Pas de commentaire

Ford 2009 Expedition v.2 Manuel d'utilisateur Page 338

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2009 Expedition v.2