Ford 2008 Ranger v.2 Manuel d'utilisateur télécharger pdf (Page 260)

Item Capacity

Ford part name or

equivalent

Ford part number /

Ford specification

Fuel tank–SuperCab

19.5 gallons

(73.8L)

——

Add the coolant type originally equipped in your vehicle.

Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only have the API

Certification mark and meet the requirements of Ford specification WSS-M2C929-A (4.0L) or

WSS-M2C930-A (2.3L and 3.0L).

Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and

if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set

by the indication on the dipstick’s normal operating range.

Automatic transmissions that require MERCON威 V should only use MERCON威 V fluid or fluid that

is specified dual usage MERCON威/MERCON威 V. Refer to scheduled maintenance to determine

the correct service interval. Use of any fluid other than the recommended fluid may cause

transmission damage.

Service refill capacity for the manual transmission is determined by filling the transmission to the

bottom of the filler hole with the vehicle on a level surface.

Traction-Lok axles use 4.75-5.0 pints (2.2-2.4L) of rear axle lubricant.

Service refill capacities are determined by filling the rear axle 1/4 inch to 9/16 inch (6mm to

14mm) below the bottom of the filler hole.

Add 4 oz. (118 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification

EST-M2C118-A for complete refill of Traction-Lok axles.

2008 Ranger (ran)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

260

1 2 ... 255 256 257 258 259 260 261 262 263 264 265 ... 271 272

Pas de commentaire

Ford 2008 Ranger v.2 Manuel d'utilisateur Page 260