Ford 2008 Edge Manuel d'utilisateur télécharger pdf (Page 136)

Activating the memory feature

To activate this feature:

1. Position the seat and mirrors to the desired positions.

2. Press the SET control on the

driver’s door panel.

3. Within 5 five seconds, press the

lock or unlock control on the

Integrated keyhead Transmitter and

then press the 1 or 2 control on the

driver’s door panel which you would

like to associate with the seat and

Driver 1 or Driver 2 positions.

4. Repeat this procedure for another

Integrated Keyhead Transmitter if desired.

Deactivating the memory feature

To deactivate this feature:

1. Press the SET control on the driver’s door panel.

2. Within five seconds, press the lock or unlock control on the Integrated

Keyhead Transmitter which you would like to deactivate and then press

the SET control on the driver’s door panel again.

3. Repeat this procedure for another Integrated Keyhead Transmitter if

desired.

Replacing the battery

The Integrated Keyhead Transmitter uses one coin type three-volt

lithium battery CR2032 or equivalent.

To replace the battery:

1. Twist a thin coin in the slot of the

IKT near the key ring in order to

remove the battery cover.

2008 Edge (edg)

Owners Guide (post-2002-fmt)

USA (fus)

Locks and Security

136

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 335 336

Pas de commentaire

Ford 2008 Edge Manuel d'utilisateur Page 136