Ford 2006 Freestar v.2 Manuel d'utilisateur télécharger pdf (Page 45)

To program the auto lamp exit time delay:

1. Start with the ignition in the OFF position and the headlamp control

in the autolamp position.

2. Deselect the auto lamps.

3. Put the ignition in RUN.

4. Put the ignition in OFF.

5. Select the autolamps.

•

Note: Steps 2 through 5 must be performed within a 10 second period.

• At this point, the headlamps and park lamps will turn on.

6. Deselect the auto lamps after the desired auto lamp delay time

(maximum of 3 minutes).

• At this point, the headlamps and park lamps will turn off.

Daytime running lamps (DRL) (if equipped)

Turns the lowbeam headlamps on with a reduced output. To activate:

• the key must be in the ON position,

• the headlamp control is in the OFF, parking lamps or autolamp

position,

• and the transmission must be out of PARK.

Always remember to turn on your headlamps at dusk or during

inclement weather. The Daytime Running Light (DRL) System

does not activate your tail lamps and generally may not provide

adequate lighting during these conditions. Failure to activate your

headlamps under these conditions may result in a collision.

High beams

Push the lever toward the

instrument panel to activate. Pull

the lever towards you to deactivate.

2006 Freestar (win)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 327 328

Pas de commentaire

Ford 2006 Freestar v.2 Manuel d'utilisateur Page 45