Ford 2005 Crown Victoria Manuel d'utilisateur télécharger pdf (Page 240)

If an overfill occurs, excess fluid

should be removed by a qualified

technician.

An overfill condition of

transmission fluid may cause

shift and/or engagement

concerns and/or possible

damage.

Do not use supplemental transmission fluid additives, treatments or

cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

AIR FILTER MAINTENANCE

Refer to scheduled maintenance information for the appropriate

intervals for changing the air filter element.

When changing the air filter element, use only the Motorcraft air filter

element listed. Refer to Motorcraft part numbers in this chapter.

Note: Do not start your engine with the air cleaner removed and do not

remove it while the engine is running.

Changing the air filter element

1. Release the clamps that secure the air filter housing cover.

2. Carefully separate the two halves of the air filter housing.

3. Remove the air filter element from the air filter housing.

4. Wipe the air filter housing and cover clean to remove any dirt or

debris and to ensure good sealing.

5. Install a new air filter element. Be

careful not to crimp the filter

element edges between the air filter

housing and cover. This could cause

filter damage and allow unfiltered

air to enter the engine if not

properly seated.

6. Replace the air filter housing cover and secure the clamps.

7. Replace the air inlet tube and secure the clamp.

’T

2005 Crown Victoria (cro)

Owners Guide (post-2002-fmt)

USA_English (fus)

Maintenance and Specifications

240

1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 255 256

Pas de commentaire

Ford 2005 Crown Victoria Manuel d'utilisateur Page 240