Ford 2004 Mustang v.1 Manuel d'utilisateur télécharger pdf (Page 176)

If the engine coolant has not been checked at the

recommended interval, the engine coolant reservoir

may become low or empty. If the reservoir is low or

empty, add engine coolant to the reservoir. Refer to

Adding engine coolant in this chapter.

Note: Automotive fluids are not interchangeable; do

not use engine coolant, antifreeze or windshield

washer fluid outside of its specified function and

vehicle location.

Adding engine coolant

When adding coolant, make sure it is a 50/50

mixture of engine coolant and distilled water. Add

the mixture to the coolant reservoir, when the

engine is cool, until the appropriate fill level is

obtained.

Do not add engine coolant when the engine

is hot. Steam and scalding liquids released

from a hot cooling system can burn you badly.

Also, you can be burned if you spill coolant on hot

engine parts.

Do not put engine coolant in the windshield

washer fluid container. If sprayed on the

windshield, engine coolant could make it difficult

to see through the windshield.

•

Add Motorcraft Premium Gold Engine Coolant

(yellow-colored), VC-7–A (VC-7–B in Oregon),

meeting Ford Specification WSS-M97B51–A1

Note: Use of Motorcraft Cooling System Stop Leak

Pellets, VC-6, may darken the color of Motorcraft

Premium Gold Engine Coolant from yellow to golden

tan.

•

Do not add/mix an orange-colored, extended

life coolant such as Motorcraft Speciality

Orange Engine Coolant, VC-2 (US) or CXC-209

(Canada), meeting Ford specification

WSS-M97B44–D with the factory-filled coolant.

2004 Mustang (mus)

Owners Guide (post-2002-fmt)

USA English (fus)

Maintenance and Specifications

176

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 239 240

Commentaires sur ces manuels

Pas de commentaire

Ford 2004 Mustang v.1 Manuel d'utilisateur Page 176

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2004 Mustang v.1