Ford 2004 Explorer v.1 Manuel d'utilisateur télécharger pdf (Page 110)

After any vehicle collision, the combination lap and shoulder belt

system at all passenger seating positions must be checked by a

qualified technician to verify that the “automatic locking retractor”

feature for child seats is still functioning properly, in addition to other

checks for proper seat belt system function.

BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if

the seat belt assembly “automatic locking retractor” feature or

any other seat belt function is not operating properly. In addition, all

seat belts should be checked for proper function. Failure to replace the

belt and retractor assembly could increase the risk of injury in

collisions.

Safety belt pretensioner

Your vehicle is equipped with safety belt pretensioners at the driver and

right front passenger seating positions.

The safety belt pretensioner removes some slack from the safety belt

system at the start of a crash. The safety belt pretensioner uses the

same crash sensor system as the front airbags and Safety Canopy娂

system. When the safety belt pretensioner deploys, the lap and shoulder

belt are tightened.

When the Safety Canopy娂 system and/or the front airbags are activated,

the safety belt pretensioners for the driver and right front passenger

seating positions will be activated when the respective seatbelt is

properly buckled.

The driver and the right front passenger seat belt system

(including retractors, buckles and height adjusters) must be

replaced if the vehicle is involved in a collision that results in

deployment of front air bags or Safety Canopy娂 and safety belt

pretensioners.

Refer to the Safety belt maintenance section in this chapter.

2004 Explorer (exp)

Owners Guide (post-2002-fmt)

USA English (fus)

Seating and Safety Restraints

110

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 295 296

Pas de commentaire

Ford 2004 Explorer v.1 Manuel d'utilisateur Page 110