Ford 2003 F-550 v.2 Manuel d'utilisateur télécharger pdf (Page 244)

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick and also in the

Lubricant specifications section in this chapter.

Use of a non-approved automatic transmission fluid may cause

internal transmission component damage.

If necessary, add fluid in 250 ml (1/2 pint) increments through the filler

tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by a qualified

technician.

An overfill condition of

transmission fluid may cause shift and/or engagement concerns

and/or possible damage.

Do not use supplemental transmission fluid additives, treatments or

cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

Automatic transmission fluid filter (if equipped)

The TorqShift automatic

transmission is equipped with a

serviceable external fluid filter

mounted on the frame rail. Refer to

the Scheduled Maintenance Guide

for service intervals.

ADD COLD HOT DO NOT ADD

Maintenance and Specifications

244

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 279 280

Pas de commentaire

Ford 2003 F-550 v.2 Manuel d'utilisateur Page 244