Ford 2003 Explorer v.5 Manuel d'utilisateur télécharger pdf (Page 91)

Replacing coded keys can be very costly. Store an extra programmed key

away from the vehicle in a safe place to help prevent any

inconveniences. Please visit an authorized dealer to purchase additional

spare or replacement keys.

Programming spare keys

You can program your own coded keys to your vehicle.

Tips:

• A maximum of eight keys can be coded to your vehicle.

• Only use Securilock娂 keys.

• You must have two previously programmed coded keys (keys that

already operate your vehicle’s engine) and the new unprogrammed

key(s) readily accessible.

• If two previously programmed coded keys are not available, you must

take your vehicle to your dealer to have the spare key(s)

programmed.

Please read and understand the

entire procedure before you begin.

1. Insert the first previously

programmed coded key into the

ignition.

2. Turn the ignition from the 1

(OFF) position to the 3 (ON)

position. Keep the ignition in the 3

(ON) position for at least three

seconds, but no more than 10

seconds.

3. Turn the ignition to the 1 (OFF) position and remove the first coded

key from the ignition.

4. Within ten seconds of turning the ignition to the 1 (OFF) position,

insert the second previously coded key into the ignition.

5. Turn the ignition from the 1 (OFF) position to the 3 (ON) position.

Keep the ignition in the 3 (ON) position for at least three seconds, but

no more than 10 seconds.

6. Turn the ignition to the 1 (OFF) position and remove the second

previously programmed coded key from the ignition.

7. Within twenty seconds turning the ignition to the 1 (OFF) position

and removing the previously programmed coded key, insert the new

unprogrammed key (new key/valet key) into the ignition.

2003 Explorer (exp)

Owners Guide (post-2002-fmt)

USA English (fus)

Locks and Security

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 279 280

Pas de commentaire

Ford 2003 Explorer v.5 Manuel d'utilisateur Page 91