Ford 2003 Explorer v.5 Manuel d'utilisateur télécharger pdf (Page 68)

6. Release the RESET AND SETUP

control, then slowly press RESET

down again.

7. Press the SETUP control

repeatedly until the correct zone

setting for your geographic location is displayed on the message center.

To exit the zone setting mode press and release the RESET control.

8. Press the RESET control to start

the compass calibration function.

9. Slowly drive the vehicle in a

circle (less than 5 km/h [3 mph])

until the CIRCLE SLOWLY TO

CALIBRATE indicator changes to

CALIBRATION COMPLETED. This

will take up to three circles to complete calibration.

10. The compass is now calibrated.

Average fuel economy (AFE)

Select this function from the INFO

menu to display your average fuel

economy in liters/100 km or

miles/U.S. gallon.

If you calculate your average fuel

economy by dividing liters of fuel used by 100 kilometers traveled (miles

traveled by gallons used), your figure may be different than displayed for

the following reasons:

• Your vehicle was not perfectly level during fill-up

• Differences in the automatic shut-off points on the fuel pumps at

service stations

• Variations in top-off procedure from one fill-up to another

• Rounding of the displayed values to the nearest 0.1 liter (gallon)

1. Drive the vehicle at least 8 km (5 miles) with the speed control

system engaged to display a stabilized average.

2. Record the highway fuel economy for future reference.

It is important to press the RESET control after setting the speed

control to get accurate highway fuel economy readings.

2003 Explorer (exp)

Owners Guide (post-2002-fmt)

USA English (fus)

Driver Controls

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 279 280

Pas de commentaire

Ford 2003 Explorer v.5 Manuel d'utilisateur Page 68