Ford 2003 Escape v.3 Manuel d'utilisateur télécharger pdf (Page 192)

• If the oil level is between the MIN—MAX marks, the oil level is

acceptable. DO NOT ADD OIL.

• If the oil level is below the MIN mark, add enough oil to raise the level

within the MIN—MAX range.

• 2.0L DOHC I4 Zetec engine

• 3.0L DOHC V6 Duratec engine

• Oil levels above the MAX mark may cause engine damage. Some oil

must be removed from the engine by a service technician.

7. Put the indicator back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to Checking the engine

oil in this chapter.

2. If the engine oil level is not within the normal range, add only certified

engine oil of the recommended viscosity. Remove the engine oil filler cap

and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

MAX or FULL mark on the engine oil level indicator (dipstick).

4. Install the indicator and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise

1/4 of a turn until it is seated.

Maintenance and Specifications

192

1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 239 240

Pas de commentaire

Ford 2003 Escape v.3 Manuel d'utilisateur Page 192