Ford 2003 Escape v.2 Manuel d'utilisateur télécharger pdf (Page 61)

5. Lift the feet over the side rails and lock them into place.

6. Ensure both feet are locked and secured into place.

To adjust the cross-bar assembly on the inner rack:

1. Loosen the screws on the

cross-bar with a T-25 Torx driver.

2. Move the cross-bar to the desired

location, keeping the cross-bar

parallel with the upper bar.

3. Tighten the screws with the T-25

Torx driver.

4. Ensure that the cross-bar is

tightened and secured into place

before attempting to load cargo.

Loading cargo:

Only load cargo in the approved

area (1) shown above. Do not load

cargo outside of the designated area

(2). Distribute the load as evenly as

possible. Always use tie downs to

secure the load.

Driver Controls

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 239 240

Pas de commentaire

Ford 2003 Escape v.2 Manuel d'utilisateur Page 61