Ford 2002 Taurus v.4 Manuel d'utilisateur télécharger pdf (Page 74)

Do not use the speed control in heavy traffic or on roads that

are winding, slippery, or unpaved.

To turn speed control off

• Press OFF or

• Turn off the vehicle ignition.

Once speed control is switched off,

the previously programmed set

speed will be erased.

To set a speed

•

Press SET+. For speed control to

operate, the speed control must be

ON and the vehicle speed must be

greater than 48 km/h (30 mph).

If you drive up or down a steep hill,

your vehicle speed may vary

momentarily slower or faster than the set speed. This is normal.

Speed control cannot reduce the vehicle speed if it increases above the

set speed on a downhill. If your vehicle speed is faster than the set

speed while driving on a downhill, you may want to shift to the next

lower gear or apply the brakes to reduce your vehicle speed.

If your vehicle slows down more than 16 km/h (10 mph) below your set

speed on an uphill, your speed control will disengage. This is normal.

Pressing RES will re-engage it.

Do not use the speed control in heavy traffic or on roads that

are winding, slippery, or unpaved.

To set a higher set speed

• Press and hold SET +. Release

the control when the desired

vehicle speed is reached or

• Press and release SET + to

operate the Tap-Up function.

Each press will increase the set

speed by 1.6 km/h (1 mph) or

• Accelerate with your accelerator pedal. When the desired vehicle

speed is reached, press and release SET +.

OFF

Driver Controls

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 239 240

Pas de commentaire

Ford 2002 Taurus v.4 Manuel d'utilisateur Page 74