Ford 2002 Taurus v.4 Manuel d'utilisateur télécharger pdf (Page 65)

6. Install the bulb socket into the lamp assembly by rotating it clockwise.

7. Install the lamp assembly on the vehicle with three nut and washer

assemblies ensuring the washers on the nuts are flush with the body to

prevent water from entering the trunk.

8. Carefully push the carpet back in to place and install the plastic cover

inside the trunk with five push pins and two plastic mushroom nuts.

Wagon

The tail lamp/turn lamp bulbs are

located in the same portion of the

tail lamp assembly, one just below

the other. Follow the same steps to

replace either bulb:

1. Make sure headlamp switch is in

OFF position and open the liftgate

to expose the lamp assemblies.

2. Remove the two bolts from the

tail lamp assembly.

3. Carefully pull the lamp assembly

from the tailgate.

4. Twist the bulb socket

counterclockwise and remove from

lamp assembly.

5. Pull the bulb straight out of the

socket and push in the new bulb.

6. Install bulb socket in lamp assembly by turning clockwise.

7. Carefully install the tail lamp assembly on tailgate and secure with two

bolts.

Lights

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 239 240

Pas de commentaire

Ford 2002 Taurus v.4 Manuel d'utilisateur Page 65