Ford 2002 F-150 v.1 Manuel d'utilisateur télécharger pdf (Page 298)

MERCONt and MERCONt V type fluids are not interchangeable.

DO NOT mix MERCONt and MERCONt V. Use of a transmission

fluid that indicates dual usage (MERCONt and MERCONt V) in

an automatic transmission application requiring MERCONt may

cause transmission damage. Use of any fluid other than the

recommended fluid may cause transmission damage.

Approximate dry fill capacity including transmission fluid cooling

system, actual refill capacities will vary based on vehicle application and

transmission fluid cooling system (i.e. coolers size, cooling lines. auxiliary

cooler capacities). The amount of transmission fluid and fluid level

should be set by the indication on the dipstick’s normal operating range.

Your vehicle’s rear axle is filled with a synthetic rear axle lubricant and

is considered lubricated for life. These lubricants do not need to be

checked or changed unless a leak is suspected, service is required or the

axle assembly has been submerged in water. The axle lubricant should

be changed any time the rear axle has been submerged in water.

Service refill capacity is determined by filling the axle to 6-14 mm

(1/4-9/16 inch) below the bottom of the filler hole with the vehicle on a

level surface.

Add 118 ml (4 oz.) of Additive Friction Modifier C8AZ-19B546-A or

equivalent meeting Ford specification EST-M2C118–A, for complete fill of

8.8 inch and 9.75 inch Traction-Lok axles.

Service refill capacity is determined by filling the axle to the bottom of

the filler hole with the vehicle on a level surface.

For 10.25 inch Traction-Lok axles, use 3.1L (6.5 pints) of Motorcraft SAE

75W-140 Synthetic Rear Axle Lubricant and 236 ml (8 oz.) of Additive

Friction Modifier C8AZ-19B546-A or equivalent meeting Ford

Specification EST-M2C118-A.

Maintenance and Specifications

298

1 2 ... 293 294 295 296 297 298 299 300 301 302 303 ... 319 320

Pas de commentaire

Ford 2002 F-150 v.1 Manuel d'utilisateur Page 298