Ford 2002 Excursion v.3 Manuel d'utilisateur télécharger pdf (Page 196)

20815.psp Ford O/G 2002 Excursion English 4th Print 2C3J-19A321-HB 04/24/2003 09:14:57 98 B

8. Turn the jack handle clockwise

until the wheel is completely off the

ground and high enough to install

the spare tire.

To lessen the risk of

personal injury, do not put

any part of your body under the

vehicle while changing a tire. Do

not start the engine when your

vehicle is on the jack. The jack is

only meant for changing the tire.

• Never use the front or rear differential as a jacking point.

9. Remove the lug nuts with the lug wrench.

10.

Replace the flat tire with the spare tire, making sure the valve stem is

facing outward. Reinstall the lug nuts until the wheel is snug against the

hub. Do not fully tighten the lug nuts until the wheel has been lowered.

11. Lower the wheel by turning the jack handle counterclockwise.

12. Remove the jack and fully

tighten the lug nuts in the order

shown.

13. Stow the the flat tire, jack, jack

handle and lug wrench. Make sure

the jack is securely fastened so it

does not rattle when driving.

14. Unblock the wheels.

Retighten the lug nuts to the

specified torque at 800 km (500

miles) after any wheel disturbance

(rotation, flat tire, wheel removal, etc.).

Bolt size Wheel lug nut torque*

Nm Lb-ft

M14 x 1.5 200-225 150-165

* Torque specifications are for nut and bolt threads free of dirt and

rust. Use only Ford recommended replacement fasteners.

Roadside Emergencies

196