Ford 2000 F-550 v.1 Manuel d'utilisateur télécharger pdf (Page 70)

Replacing lost transmitters

If a remote transmitter has been lost

and you would like to remove it

from the vehicle’s memory, or you

would like to purchase additional

remote transmitters and have them

programmed to your vehicle:

• Take all your vehicle’s

transmitters to your dealer for

programming, or

• Perform the programming

procedure yourself

Programming remote transmitters

It is necessary to have all (maximum of four — original and/or new) of

your remote transmitters available prior to beginning this procedure.

To program the transmitters yourself:

• Insert a key in the ignition and

turn from 3 (OFF) to 4 (ON) five

times in rapid succession (within

10 seconds) with the eighth turn

ending in the 4 (ON) position.

The doors will lock/unlock to

confirm that programming mode

has been entered.

• Within 20 seconds, program a

remote transmitter by pressing

any button on a transmitter. The doors will lock/unlock to confirm that

the remote transmitter has been programmed. (If more than 20

seconds pass before pressing a remote transmitter button, the

programming mode will exit and the procedure will have to be

repeated.)

• Repeat the previous step to program additional remote transmitters.

The doors will lock/unlock to confirm that each remote transmitter has

been programmed.

• When you have completed programming the remote transmitters, turn

the ignition to 3 (OFF) or wait 20 seconds. Again the doors will

lock/unlock to confirm programming has been completed.

Controls and features

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 255 256

Pas de commentaire

Ford 2000 F-550 v.1 Manuel d'utilisateur Page 70