Ford 2000 Expedition Manuel d'utilisateur télécharger pdf (Page 217)

11. Straighten alignment pins, making them parallel with the outer edges

of the attachment standoff.

12. Carefully insert the headlamp

assembly into the vehicle making

sure the alignment pins are inserted

into the proper holes and into the

guide ribs.

13. Hold the headlamp assembly

snugly against the vehicle and push

down on the clips to lock the lamp

into place.

Replacing front parking lamp/turn signal bulbs

1. Remove the screw and lamp assembly from the vehicle.

2. Rotate the bulb socket

counterclockwise and remove from

the lamp assembly.

3. Carefully pull the bulb out of the

socket and push in the new bulb.

4. Install the bulb socket into the

lamp assembly and rotate clockwise.

5. Install parking lamp assembly on

vehicle.

6. Push gently until parking lamp

assembly seats.

7. Install screw on the lamp assembly.

Replacing tail lamp/backup lamp bulbs

The tail lamp/backup lamp bulbs are

located in the same portion of the

tail lamp assembly, one just below

the other. Follow the same steps to

replace either bulb:

1. Open the liftgate to expose the

lamp assembly screws.

2. Remove the two screws from the

lamp assembly.

Maintenance and care

217

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 255 256

Pas de commentaire

Ford 2000 Expedition Manuel d'utilisateur Page 217