Ford f150 Manuel d'utilisateur télécharger pdf (Page 71)

Use the rotary control to adjust the

sensitivity of the rain sensor. With low

sensitivity, the wipers will operate when

the sensor detects a large amount of

moisture on the windshield. With high

sensitivity, the wipers will operate when

the sensor detects a small amount of

moisture on the windshield.

Keep the outside of the windshield clean

because the rain sensor is very sensitive. If

the area around the interior mirror is dirty,

then the wipers may turn on, for example,

if dirt, mist or insects hit the windshield.

WINDSHIELD WASHERS

Note: Do not operate the wipers on a dry

windshield. This may scratch the glass,

damage the wiper blades or cause the wiper

motor to burn out. Always use the

windshield washer before wiping a dry

windshield.

Note: Do not operate the washers when

the washer reservoir is empty. This may

cause the washer pump to overheat.

E172818

• A brief press causes a single wipe

without washer fluid.

• A brief press and hold causes the

wipers to swipe three times with

washer fluid.

• A long press and hold will turn on the

wipers and washer fluid for up to 10

seconds.

A wipe will occur a few seconds after

washing to clear any remaining washer

fluid. You can switch this feature on or off

in the information display. See

Information Displays (page 86).

69

F150 (TF6)

Wipers and Washers

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 468 469

Commentaires sur ces manuels

Pas de commentaire