Ford f150 Manuel d'utilisateur télécharger pdf (Page 26)

The LATCH system is composed of three

vehicle anchor points: two lower anchors

located where the vehicle seat back and

seat cushion meet (called the seat bight)

and one top tether anchor located behind

that seating position.

LATCH compatible child safety seats have

two rigid or webbing mounted

attachments that connect to the two lower

anchors at the LATCH equipped seating

positions in your vehicle. This type of

attachment method eliminates the need

to use safety belts to attach the child seat,

however the safety belt can still be used

to attach the child seat if the lower anchors

are not used. For forward-facing child

seats, the top tether strap must also be

attached to the proper top tether anchor,

if a top tether strap has been provided with

your child seat.

Your vehicle is equipped with LATCH lower

anchors for child seat installation at the

following seating positions (LATCH is not

available on F150 Regular Cab):

SuperCab and SuperCrew

E166694

E166695

The lower LATCH anchors are located at

the rear section of the rear seat between

the cushion and seatback. Follow the child

seat manufacturer's instructions to

properly install a child seat with LATCH

attachments.

Follow the instructions later in this chapter

on attaching child safety seats with tether

straps.

Attach LATCH lower attachments of the

child seat only to the anchors shown.

Use of Inboard Lower Anchors

from the Outboard Seating

Positions (Center Seating Use)

WARNING

The standardized spacing for LATCH

lower anchors is 280 millimeters (11

inches) center to center. Do not use

LATCH lower anchors for the center

seating position unless the child seat

manufacturer's instructions permit and

specify using anchors spaced at least as

far apart as those in this vehicle.

24

F150 (TF6)

Child Safety

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 468 469

Commentaires sur ces manuels

Pas de commentaire