Ford f150 Manuel d'utilisateur télécharger pdf (Page 256)

Examples of acceptable condensation are:

• Presence of thin mist (no streaks, drip

marks or droplets).

• Fine mist covers less than 50% of the

lens.

Examples of unacceptable moisture

(usually caused by a lamp water leak) are:

• Water puddle inside the lamp.

• Large water droplets, drip marks or

streaks present on the interior of the

lens.

Take your vehicle to a dealer for service if

any of the above conditions of

unacceptable moisture are present.

Replacing Fog Lamp Bulbs (If

Equipped

E163826

1. Make sure the headlamps are off.

2. Disconnect the electrical connector

from the fog lamp bulb.

3. Turn the bulb counterclockwise and

remove it from the fog lamp.

4. Install the new bulb in reverse order.

Replacing

Brake/Tail/Turn/Reverse Lamp

Bulbs

1. Make sure the headlamps are off.

2. Open the tailgate to access the tail

lamp assemblies

E167364

3. Remove the two bolts from the tail

lamp assembly. Then, carefully pull the

lamp assembly from the tailgate pillar

by releasing the two retaining tabs.

4. Disconnect the electrical connector

from the bulb.

E167365

5. Rotate the bulb socket

counterclockwise and remove it from

the tail lamp assembly.

6. Install the new bulb in reverse order.

Replacing Cargo Lamp and High-

mount Brake Lamp Bulbs

1. Make sure the headlamps are off.

2. Remove the two screws and move the

lamp assembly away from the vehicle

to expose the bulb sockets.

254

F150 (TF6)

Maintenance

1 2 ... 251 252 253 254 255 256 257 258 259 260 261 ... 468 469

Commentaires sur ces manuels

Pas de commentaire